I could have sworn I'd posted about this here before, but I can't find the thread and it's bothering me again, so . . .
Yeah, as I let the clutch out accelerating away from a stop, there's this little set of clicks that I haven't been able to figure out. My chain is only a few thousand miles...
so the background for my issue is as follows i am a nube, i bridged 2 wires now my fz6 wont start unless the clutch is engaged, however when i release the clutch it dies.
i have tried bypassing the clutch switch and the kickstand switch, checked all the fuses and the wiring all look good.
when...
Hello Folks,
Can anyone help me out with the size of the clutch centre nut which holds the clutch basket on? Whatever it is i don't have a socket drive big enough to take it off!
I've checked the Yamanual, and the Haines service and repair manual, they both only supply torque amounts for...
Just an FYI I thought I'd post some information.
23,000 miles on the bike, clutch cable WELL maintained.
While lubing it yesterday (and it was working fine), I noticed the clearish plastic cable insert coming OUT at
the lever end of the cable(nothing should stick put BUT the cable)...
On my Ducati. Took me a year after purchasing the bike brand new, that this bike didn't have a clutch cable. Or at least, it takes some sort of fluid, some say it's the same as brake fluid. Pictured below is my clutch reservoir, which appears dark, and a noticeable amount of clear fluid on...
Hey guys brand new to motorcycles just got my hands on a 2005 Yamaha FZ6 with 6000 miles on it it hadn't been written a whole lot within the last couple years so I'm having to work on it before I can ride it worked on cars my whole life but this is my first motorcycle. The issue I'm having is...
Hello,
New rider and owner of a 05 FZ6. Things have been great so far but noticed some wiggle (mainly up and down) in my clutch and brake lever. I don't see anything I can tighten on the clutch side, the brake looks like it will fit an allen wrench up top but unsure.
Any ideas?
I was just infomed by my mech that my clutch basket should be replaced.
My bike has 26k miles of smooth riding, clutch was never dumped to pop a wheelie etc.
Last bike that I got up to that mileage had clutch "as new" (as possible) when inspected (a ninja 650r).
The reason I brought the bike...
Clutch how to remove basket? Help
Please help me!
Fz6s 2007. I did removed central nut and clutch boss but can't take off clutch housing. Somthing is blocking. Please help before summer ends!:)
Thanks Martin
Please help me!
Fz6s 2007. I did removed central nut and clutch boss but can't take off clutch housing. Somthing is blocking. Please help before summer ends!:)
Thanks Martin
Anyone else notice this?
This summer I would like to make a pass at the local 1320 and a solid launch is something I rarely subject the bike too! That said I would hate to grenade it for entertainment!
What kits have been used and which have steel backed frictions vs oem aluminum which we've...
aluminum
backed
bike
clutch
ebc
entertainment
frictions
full
grenade
hate
kits
launch
local
make
notice
oem
oil
pass
rarely
solid
steel
subject
summer
synthetic
wha
Hi all,
I'm going to be replacing my clutch this weekend and decided to go with the KG clutch because I have had nothing but good luck with them in my other bikes. After recieving the clutch I noticed that all the clutch plates and are the same with one not being bigger. Also all the friction...
Picked up a horribly neglected 05FZ6 with 23k on it. After a few hundred miles and everything seemed OK pulled some maintenance on it. Changed all the fluids new plugs and fix a bunch of piddly stuff. And after changing the oil I put about 50 miles on it and gained a lot of free play in the...
I realize this isn't Fizzer related, but I'm trying to discern a quirk I noticed this morning on my 600F4i. When I let the clutch lever out, I can hear a sort of springy, "sproing" type sound from the clutch basket somewhere. Rolling the bike, putting it in gear, turning it on - it still makes...
Hi everybody, I come to the forums today asking for help or guidance in troubleshooting my 2008 FZ6 S2. I bought this bike brand new of the showroom floor and have since put ~45,000 miles on it. I don't ride too aggressively, however I do have a tendency of doing some clutch up wheelies out of...
Hi all, newbie here both to the forum, and to my FZ6. The previous owner did a side-of-the-road clutch cable replacement, and I'm trying to replace it with the OEM version, but having a hell of a time routing it correctly. Two questions right off the bat, for those of you who have done this...
:thumbdown:
Ok so I broke a clutch cable tonight, big deal, what could be worse......
alright I'm filtering in traffic..........
I'm about to go down a cog and jump ahead as the light changes.......
I pull the clutch and..............
nothin'...........
uh oh......
Ive slowed down too...
Just got my 04 fz6 a few weeks ago and the clutch lever is super stiff on it. I haven't had this issue with any of my other bikes so never needed to address it. Does anyone else have experience with this problem or have any advice on how to soften the pull on my clutch? Thanks.