Latest activity

  • Motogiro
    Motogiro replied to the thread Coolant!.
    Once your system is leak free and the pressure cap is confirmed good refill the system with a 50:50 ratio of coolant. Plain water is not...
  • Motogiro
    Motogiro reacted to Gary in NJ's post in the thread Coolant! with Like Like.
    Those are some significant leaks. Allowing the coolant system to pressurize should resolve the problems.
  • Motogiro
    Motogiro reacted to Cocoloco's post in the thread Coolant! with Like Like.
    Yep coolant leak everywhere Hose clamp seemed to loosen up ive replaced them all and no leaks, Test ride tomorrow...
  • Motogiro
    Motogiro reacted to Gary in NJ's post in the thread Coolant! with Like Like.
    Water boils at 212F/100C at ambient pressure (14.7 psi or 1013mb). Raising the pressure by 5 psi (1379mb) increases the boiling point to...
  • Motogiro
    Motogiro replied to the thread Fz6 error 34.
    Should read, "The secondary leads (where the spark plug wires go)" The primary winding is the powered leads to the coils.
  • C
    Cocoloco reacted to Gary in NJ's post in the thread Coolant! with Like Like.
    Water boils at 212F/100C at ambient pressure (14.7 psi or 1013mb). Raising the pressure by 5 psi (1379mb) increases the boiling point to...
  • Gary in NJ
    Gary in NJ replied to the thread Coolant!.
    Water boils at 212F/100C at ambient pressure (14.7 psi or 1013mb). Raising the pressure by 5 psi (1379mb) increases the boiling point to...
  • C
    Cocoloco replied to the thread Fz6 error 34.
    I Okay, the ecu thats available in brixia moto is for s1 only priced at $300, Im not sure about the s2 but im sure you fan find a...
  • H
    hun7ter replied to the thread Fz6 error 34.
    Yes mate, it does have an immobiliser. Mine is an 2008 fz6-n s2.
  • H
    hun7ter reacted to Cocoloco's post in the thread Fz6 error 34 with Like Like.
    I bought one from brixia moto in italy May i know what year and model is your bike? Does it have immobilizer?
  • C
    Cocoloco replied to the thread Fz6 error 34.
    I bought one from brixia moto in italy May i know what year and model is your bike? Does it have immobilizer?
    • IMG_20220418_125031.jpg
  • C
    Cocoloco replied to the thread Coolant!.
    I I was in shocked when i saw those leaks under pressure. One thing i understand is the system should be pressurized when hot, if there...
  • H
    hun7ter replied to the thread Fz6 error 34.
    I'm bringing it in to the garage soon to get it checked. Really hoping it ain't the ecu as that's gonna set me back close to a grand. Do...
  • H
    hun7ter reacted to Cocoloco's post in the thread Fz6 error 34 with Like Like.
    If you can do some wrenching. Clean spade terminals of the coil Unplug ECU check for corrosion and clean Inspect wires from ecu to...
  • H
    hun7ter reacted to Motogiro's post in the thread Fz6 error 34 with Like Like.
    Don't assume because people have had ECU issues that that is the problem. A member on this forum had the same issue but it turned out to...
Top