Your 2010 Mod List

[opnwhlmnd]

Install my ported and polished R6 cylinder head and intake tracts.

50mm thickness head gasket to raise compression up to 13.2

Already had R6 camshafts in the FZ6 head and loved the improvement.

Renthal streetfighter bars

MoTec engine management system

.

 

[Kazza]

Hmmm, my list is more modest than I thought, seeing some of those above...

Kazza did you win the lottery??

Nope, wish I did. I have as secret stash of cash I've been saving for a rainy day.

I think it's gonna rain real soon......

:rockon:

 

[Kazza]

Maybe go naked? I'm torn between wind protection and the coolness.

Definately go Naked.

Said it before, I'm a naked girl at heart.....

 

[MCFC21]

For 2010

R6 front forks (spill in Dec guided me to this )
Pazzo levers (needed lever anyway as above)
Devil exaust ...arrived today ..had purchased before spill

View attachment 24407 exaust

View attachment 24408 poor Horse

 

[Andz]

Said it before, I'm a naked girl at heart.....

:needpics:

 

[Kazza]

:needpics:

These are pics you DEFINATELY won't be seeing on any thread soon.....

 

[Norbert]

Install my ported and polished R6 cylinder head and intake tracts.

50mm thickness head gasket to raise compression up to 13.2

Already had R6 camshafts in the FZ6 head and loved the improvement.

.

WOW!
That's an awesome mod dude!!
I would never have the ballz to mess with my engine like that!
I would love to see some pics of the installation!!
How did the R6 camshafts change the riding experience?

 

[FZ1inNH]

This is the black screen but I'll get the cobalt blue. The bike will end up looking more like Copperdog's pictured here:

 

[Hellgate]

I've bought a Brembo 19RCS master cylinder w. Pazzo shorty lever, CRG Barend Mirrors and Motovation Barends :thumbup:


View attachment 24396

View attachment 24397

And I'm waiting for my new Beringer 6-pot calipers to arrive from France.opcorn:

View attachment 24398

:rockon:

WOW! That is on rockin' brake system. Once you get it installed please post.

I'm considering changing my OEM MC out for the Brembo.

 

[Hellgate]

Install my ported and polished R6 cylinder head and intake tracts.

50mm thickness head gasket to raise compression up to 13.2

Already had R6 camshafts in the FZ6 head and loved the improvement.

Renthal streetfighter bars

MoTec engine management system

.

Sweat! Put that puppy on the dyno, I've love to see the results.

Can you explain more on the MoTec system? Does it use a shower injector?

 

[Hellgate]

Here's my list:

Keep in mind this is for a Buell 1125R...but my heart is Yamaha Blue and Yellow. :thumbup:

1. Free Spirits Full Exhaust - Done - To be modified with Akrapovic Ti Cans
2. Buell Race Front Rotor and EBC HH pads - Done
3. Buell "Kick Ash" Tinted wind screen - Done
4. Baldwin Motorbikes Saddle and Pillion - Done
5. Rizoma Grips and Bar End Sliders - Done
6. Woodcraft Rearset - Waiting for release
7. Power Commander V - Done
8. Eric Buell Racing Air Box - Done, 125 hp at the wheel on a Factory Pro, or 140 at the wheel on a Dyno Jet
9. Dyno Tune by AF1 Racing - Need PCV & Air box
10. American Sport Bike Riser Clip-Ons - Waiting on release
11. Race Tech Fork Springs, lighter softer by .25

And if the Gods are smiling I'd love to get a small dirt bike this year. Like a 250 four stroke to trail ride on.

 

[opnwhlmnd]

Sweat! Put that puppy on the dyno, I've love to see the results.

Can you explain more on the MoTec system? Does it use a shower injector?

I'll dyno it when I get it all finished.

The MoTec system does use a shower type injector. I'm going with some RC brand injectors installed in R6 throttle bodies with Graves slide stops.

It will also eliminate the group type injection that the FZ6 has and make it sequential.

I can use low ohm injectors which makes the ECU run much cooler. Also frees up a bunch of electrical current used by the ECU.

Will have to use a wide band lambda (oxygen) sensor instead of the narrow band found on the FZ.

How did the R6 camshafts change the riding experience?

Made it pull much harder starting around 4500 RPM and all the way to top end. Sure wakes the FZ engine up that's for sure.

.

 

[whyjay]

I am totally stoked about my mods so far and I can't wait to ad these tasty parts:

15T sprocket w/ speedo healer
Full Fairing kit from Yamaha/Canada
Flush mounts in front
Hyper Pro lowering springs
:rockon:

 

[Kazza]

What belly pan is that?

 

[yoshiki]

mods for 2010:
-exhaust (still contemplating which brand, probably akrapovic)
-rearsets (most probably ottimotto)
-yamaha side fairing/cowling (still sourcing)
-ohlins front fork springs (ordered)
-ohlins rear shocks (ordered)
-car socket charger (just need to wire it up now)
-ram mount aqua box for my phone gps. i have the small aqua box which is a little too small. (selling my small squa box or trade if anyone is interested)
-double bubble sports windshield

 

[turbid]

you ve got some very nice and original ideas for your bikes.

here are my planned mods

paint the windshield black with blue sides to match the bike (mines is a2006)

paint the front fender blue

top saddlery seat

r6 forks and brakes if i find a decent set at good prices.

ill post pics when the paint job is ready (parts are already at the sprayer)



maybe radiator cover and a new top of the range helmet for me maybe an agv gp tech

 

[turbid]

i bought these recently... i forgot to add before sorry

 

[grommit]

I'm probably going to do some morphing; FZ6 to FZ8.

We shall see.

 

[Gfunk1127]

Need to make/buy a frame for my custom hard bags

 

[Ridgeback]

I'm going to do some more research on an upside down front end and the speedblock white paintjob.

few other little bits and pieces like the carenage shrouds and the access carbon engine protectors

Same as most though,the lottery win would help