fazer.rider
Super Member
first try i used just suction cup with safety strap = crap
second try i used superglue = crap
this time i drilled two holes and used two bolts = fool proof!!!
why mount on windshield? well the fazer s2 has a large bar clamp so there's little space for the RAM bar mount. with gps mounted on the handlebar you need to look down further (more dangerous). the attached illustration shows (green line means line of sight). with the stickers it looks much better now
EDIT: oh yeah WARNING! the location where i mounted the gps is the optimum location. any lower or to the right it will interfere with the left handlebar controls or the right handlebar brake fluid box when the gps unit is present (at max. steering angle). make sure you have clearance before drilling!!!
Edit 2: by the way i drilled two holes on the stock car suction cup mount for the garmin in order to mount it. i plan on leaving this mount on there permanently anyway cuz i have another garmin for the car. it may or may not be your cup of tea though
second try i used superglue = crap
this time i drilled two holes and used two bolts = fool proof!!!
why mount on windshield? well the fazer s2 has a large bar clamp so there's little space for the RAM bar mount. with gps mounted on the handlebar you need to look down further (more dangerous). the attached illustration shows (green line means line of sight). with the stickers it looks much better now
EDIT: oh yeah WARNING! the location where i mounted the gps is the optimum location. any lower or to the right it will interfere with the left handlebar controls or the right handlebar brake fluid box when the gps unit is present (at max. steering angle). make sure you have clearance before drilling!!!
Edit 2: by the way i drilled two holes on the stock car suction cup mount for the garmin in order to mount it. i plan on leaving this mount on there permanently anyway cuz i have another garmin for the car. it may or may not be your cup of tea though
Last edited: