FZ6 Rearset Set Back Plates For Sale

[mave2911]

Sorry to hear that. I have one set of silver V1's but you're probably looking for black, IIRC. I can try to get a run of 10 black going. sarawoot & u mean you're already 20% there. Get 8 more people and I'll start collecting money and put in the order.

Actually, I have an '05, so silver is perfect!

PM me your Paypal and a price inc international shipping and I'll deposit immediately.

Cheers,
Rick

 

[mave2911]

sorry to hear about the drop

hope your ok

Sent from my iPhone using Forum Runner and it works every time !

I'm fine, the gear did its job! My bike had scratches on the lower fairing and somehow the repair bill (insured) is $6500! (+ my $1000 gear cover, and $2000 accessories!)

Problem is the fairing had to come from the UK and they've had it for 8 weeks!

 

[ckrockets]

That should work.

I'm having issues getting hold of one of these in Ireland, Will this fit?
Throttle Linkage Ball Joint Clip Nut M6x1 0 LH Thread Zinc Plated 951 6LH | eBay

Thanks for the help,

Neil

 

[agf]

I'm part way thru my write up and sorting pics of my install.
hope you can wait a day or two .....
PC at home is out of commission so trying to get it together at work

just wanna thank all those that have done this already and whose ideas I have adopted or adapted

I gotta say this is a very good riders mod

Sent from my iPhone using Forum Runner and it works every time !

 

[Gelvatron]

I got the part in to mount it looks like a weekend project was about 15.40 for shipping and the joint

 

[oso2k]

I'll update the links at the beginning of the thread when the new writeup is done. Thanks all!

 

[ckrockets]

hey give credit where credit is due...this was my idea...

http://www.600riders.com/forum/fz6-general-discussion/2987-fz6-rearset-set-back-plates-sale-24.html#post522725

my above pictorial was pretty straight forward or so i thought...

I'll update the links at the beginning of the thread when the new writeup is done. Thanks all!

 

[oso2k]

Of course.

 

[agf]

ok a big thanks to all for ideas thoughts and input,
I hope this write up helps anyone doing this mod. If anyone needs me to email the pdf to them just pm me

 

[Gelvatron]

I wasnt able to see your thumb nail until now i have what i need thank VERRRYYYY much for the write up, answered alot of questions

ckrockets agf oso2k

Great guys great ideas and execution thank you for your help gents

 

[agf]

By any chance does anyone have a good suggestion for where to find a rod extension

I have seen them in hardware stores and anywhere that sells threaded rod should have them.

I still have one, so if you cant get one locally pm your address to me and I'll chuck it in the mail,
let me know
cheers
ade

 

[Gelvatron]

I have seen them in hardware stores and anywhere that sells threaded rod should have them.

I still have one, so if you cant get one locally pm your address to me and I'll chuck it in the mail,
let me know
cheers
ade

can i get a few pictures of what you have i found double female end rod extensions but i was hoping to find a female/ male rod extension but that would be too nice haha:thumbup:

 

[agf]

can i get a few pictures of what you have i found double female end rod extensions but i was hoping to find a female/ male rod extension but that would be too nice haha:thumbup:

yeah I was hoping I could find a male /female extension too
but I had to go with this:

 

[Nelly]

sorry to hear about the drop

hope your ok

Sent from my iPhone using Forum Runner and it works every time !

+ 1 mate,
How's the damage?

Neil:thumbup:

 

[Nelly]

Got my pivot bolt today and a new clutch cable.
Will get the bolts tomorrow and weather permitting I'm going to do the install.

Adrian, i'm just wondering if extending the shifter rod is essential?
I've not looked at the shifter yet and I'm a little concerned to add another part that has potential to move into the mechanism. If its not essential I'm going to stick with as few parts as possible.

Thanks to everyone how has innovated and contributed to make this mod brilliant.

Neil

Sent from my HTC One X

 

[ckrockets]

Go back and look at my pictorial very carefully.

http://www.600riders.com/forum/fz6-general-discussion/2987-fz6-rearset-set-back-plates-sale-24.html#post522725

All you need to do this linkage flip mod is the pivot joint and nut you have pictured.

This mod is so simple that's the beauty of it. I'm an engineer and whenever I do something I look for the most simple solution or the k.i.s.s. philosophy "keep it simple stupid".

Again this mod is extremely simple...disassemble, drill and punch out old joint, install new joint with nut using loctite and reassemble as seen in my pictorial.

Everything lines up perfect no need to extended or add any additional parts besides the new joint.

Got my pivot bolt today and a new clutch cable.
Will get the bolts tomorrow and weather permitting I'm going to do the install.

Adrian, i'm just wondering if extending the shifter rod is essential?
I've not looked at the shifter yet and I'm a little concerned to add another part that has potential to move into the mechanism. If its not essential I'm going to stick with as few parts as possible.

Thanks to everyone how has innovated and contributed to make this mod brilliant.

Neil

Sent from my HTC One X

 

[Gelvatron]

I don't think the extension is necessary it just puts the linkage further up into the pocket of the engine it's a visual thing for me

 

[Nelly]

Re: Re: FZ6 Rearset Set Back Plates For Sale

Go back and look at my pictorial very carefully.


This mod is so simple that's the beauty of it. I'm an engineer and whenever I do something I look for the most simple solution or the k.i.s.s. philosophy "keep it simple stupid".

Thanks for the response, I did look at your excellent how to and was just double checking as I am also an advocate of the K.I.S.S principles.

I will let you all know how it goes.

Neil


Sent from my HTC One X

 

[agf]

yeah I agree the install doesn't need the extension but I had been thinking the rearward a movement of the rear set might benefit from adding length to the shaft

so I put it altogether and thought it a bit ugly so did the shrink wrap and then when I fitted it to the gearbox shaft during install realised that it was maybe overkill but I as it was already wrapped and loctited I kept it

Sent from my iPhone using Forum Runner and it works every time !

 

[egaib001]

My friend and I will both buy a set of the black setback plates!

That makes 4 of us now I believe...

We need 6 more people interested for OSO2K to get em made.


Track season is here, you know you want some!!

:steve: