change

I’m sure this has been said before, but I want to change my headlight bulbs to xenon white, what is the size of the bulbs. 2008 Fz6

how do I post them? I am going to be tearing my bike down tomorrow to change head gasket, radiator, thermostat, coolant, oil, filter ect....

This topic has probably been asked, and beaten to a pulp but it's 2019 and I'm bringing it back :) I ordered an OEM oil filter + that $15 tool from yamaha to remove it. Going to do an oil change soon, I was lazy and did not change my ~900 miles I had on the last oil change before putting it...

Hi, guys! Last two years ignition lock on my FZ6 S2 works very badly. Sometimes it tooks 3-5 minutes to turn a key (I know that it is common problem for most of Yamahas). I've tried different lubrications but alas nothing worked well... Since I have US version without immobilizer, I decided...

Saturday 2018-06-02 and the goal is oil change on the Fizzer. Throw the tank bag on and hit one store for a Wix filter and plan to hit another for the oil (I want what I want). Any who, somehow I head to the rising sun which leads me 90mi to all of this... Yes, this is the view...

I changed my oil and filter and now I notice the rear wheel spins ~15 RPM in neutral when on the center stand. I read this is normal but it did just start after this oil change for me. I put in 10/40 Yamalube as specified. Might this be caused by over-filling? - the dip stick has it right to the...

Hey all, I need experts. Sometimes (hard to repeat), when I'm accelerating hard in 2nd gear, there is an abrupt stop/start to power delivery that lasts less than half a second. The engine tone doesn't change much, so it seems like it has to be something in the transmission. How bad a thing am...

Hello, In my last rear tire change, tire guy told me to change the rear wheel dampers soon. Did anyone ever change any of them? I mean this part:

Is it just a fz6 thing that the clutch engages at the very end. I would prefer it being in the middle any way to change it?

As i read the other bearing thread, i would like to ask, did you ever change swingarm bearings. I plan to change my S1 swingarm with an upgraded S2 one. I bought it from ebay Germany with 40k km on but looks perfect. Checked bearings with hand, and they look ok to me. Meantime i have already...

Hello Is it a straight swap to change from the old swing arm to the new one? I got a 2005 fz6. Someone knows? Thanks

I'm going to be changing my fork oil this weekend. Is it worth while to change my fork seals as well since I will have the forks off the bike? They are not currently leaking and I have about 13,000 miles on my bike.

Hey guys thanks for taking the time to answer my question, So i left my bike in the garage over the winter and I (irresponsibly) did not lube it so the chain is real stiff and has some seized links and sounds horrible. I want to change the chain, I've read that the stock length is 118 links, I...

I just got the R6s forks and brakes with the master cylinder/lever still attached. So, here is a question : My 05 has twin-pot brakes up front, should I use the R6 master cylinder/lever for the 4-pot calipers instead of the ones on my bike? Reasons that support the change : - Stock part...

I change to set of PR4s 1 year and 10 month ago and done 20400 Km on them. My front has worn till the ware strip. Its pretty uneven too, Only on right center ,but rest all the places it has bit more on it. Is it normal to ware front before the rear? I read in the forum somewhere that...

I've got a 07 with Leo Vince exhaust and a PCIII - I've never had it tuned on a dyno just downloaded a map from the web and hoped for the best. I've now moved to Colorado and the altitude change has the bike really rich so I made an appointment to get her tuned up. Really looking forward to...

Hey everyone. After working on getting my front axle unstuck for about a month, I can finally begin working on what I originally wanted to do before I came to an immediate halt when I couldn't get the axle off. So anyways, I wanted to change the fork fluid on my bike. It has 25000 miles...

Anybody have any tips for changing a tire? Had a gash in my rear tire and after receiving my new tire today decided to change it. It was a total pain in the ass. I'd read that breaking the bead was the hardest part, that part was simple. Getting the first side of the tire off the rim wasn't...

the intake specifications says it should be between 0.13 and 0.20. Most of them are at 0.13. What shall I do? leave them or because they are basically at the limit of the specification, pretend they are let's say 0.10 and change the shims? I don't want to have to re open the engine again in a...

So I have done a search on the site and a google search to find a answer but most answers I found were 7-10 years old. The quick story...I have been running K&N oil filter and Rotella T6 5w-40 for almost 2500 miles. Bike is almost due for an oil change. Would it be a bad thing to run the...