Ericrunner
New Member
Hi im currently building a reverse trike for my wife. Im desperately looking for pin id on the cdi as i have no wire harness so i will make my own. Dont tell me to go see the dealer im in Cambodia tks
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
- Joined
- Feb 7, 2009
- Messages
- 12,920
- Reaction score
- 1,725
- Points
- 113
- Location
- Cape Coral, Florida, USA
Seriously go to ebay and grab a used harness for S1 or S2. The connectors alone will cost 4x that.
The coils are are marked with a very tiny + and - near the spade btw...
Connectors including the ecu can be found here.
https://www.corsa-technic.com
The coils are are marked with a very tiny + and - near the spade btw...
Connectors including the ecu can be found here.
https://www.corsa-technic.com
Scott, nice find. You should add this to the electrical sticky Where I Found Components...
- Joined
- Feb 7, 2009
- Messages
- 12,920
- Reaction score
- 1,725
- Points
- 113
- Location
- Cape Coral, Florida, USA
I've posted it previously (awhile ago).
Feel free (or Cliff), to make a "sticky" for the link (I think admin does it)...
Ericrunner
New Member
I have the plugs for the cdi what i need to no is what pin is what!
- Joined
- Feb 7, 2009
- Messages
- 12,920
- Reaction score
- 1,725
- Points
- 113
- Location
- Cape Coral, Florida, USA
I gather you don't have the shop manual?
PM me with your e-mail address and note the year bike..
Where you found your parts thread is stickied here....
https://www.600riders.com/forum/fz6...-where-you-found-electrical-parts-thread.html
What are you referring too? What is the cdi? Do you mean the ECU? A 34 pin connector?
If so it is posted on the forum in a sticky and a few other places. Most of them by me.
Ericrunner
New Member
https://screenshot.net/ed6wumg
https://screenshot.net/7lq9aon
https://screenshot.net/2gq7u1m
Can you please let me know which wire is for which pin?
https://screenshot.net/7lq9aon
https://screenshot.net/2gq7u1m
Can you please let me know which wire is for which pin?
- Joined
- May 8, 2008
- Messages
- 15,356
- Reaction score
- 1,605
- Points
- 113
- Location
- San Diego, Ca.
That number and picture are for a Yamaha FZ600. The FZ6 was manufactured between 2004 and 2009 and the FZ6 is a different bike than the FZ600. You will need to confirm what year and model engine you are trying to get running. The unit you've pictured is not an FZ6 module, Do you have better, confirmed info on your engine?
Last edited:
