Your Most Recent Repair?

FZSexy

FZSexy

Member
Joined
Jun 9, 2014
Messages
243
Reaction score
1
Points
0
Location
California
Visit site
Post it. Along with the year of your bike. You may also list other repairs since you've owned the bike. Not maintenance, preventive or otherwise. But things that broke or brokedown.

I have seen a few or several new threads around with riders experiencing some fairly serious issues. From a blown engine to a broken clutch to an electrical nightmare to some sort of "popping" at 8000rpm. A few other related threads are around, too. Seems things aren't perfect no matter how reliable or well serviced a bike is.

I know the key is preventive maintenance for many things, but not all things of course. This thread will help those asking "how reliable is the FZ6?" And I am sure such a thread already exist. But this thread is more about how unreliable is the FZ6? That is the question at hand for those who would want to know. And here are some answers below

2007 FZ6

10,500 miles

Owned for 4 and 1/2 months and 4000 miles

No repairs
 
Two pretty recent ones:

2006 FZ6, 34k miles

Indicators not working -> cleaned up corroded connector
Cam chain tensioner failure -> towed to garage, CCT and timing chain replaced, valve clearances checked
 
2007, 17,000 miles currently. Purchased used/wrecked/abused at 4,500 miles, owned since approx 2008.

No failure issues (again not counting replacement battery, oil changes, worn tires, etc)
 
Bought a 2009 FZ6 with 600 miles in mid April 2014. Owned it 4 months. Noticed steering head bearing loose. Went to take steering chrome cap nut off and it was galled to the threads of steering shaft from bottom triple. Stripped the threads. Took off whole front end and now doing an R6S fork swap. Bike was mint and garage kept. I do not suspect foul play from previous owners. Bike was garage kept and original bearings were clean and had grease.
 
04 fz6 bought with 10k sold with 45k

2 sets of handlebars
2 brake levers
1 clutch lever
1 mirror
Cracked rim (I cracked it changing a tire)
Cracked frame
Cracked oil pan
Stater
Fork seals
Rear rotor

Sent from my pocket rocket that don't know how to spell
 
2006 FZ6S
20,500 miles
Original owner

No mechanical repairs ever

The original horn mount broke off from using a heavy aftermarket horn, fabricated my own aluminum mount.

Maintenance:
spark plugs
4 sets tires
clean/lube chain every 500mi
replaced air filter
changed coolant 2X
Changed brake fluid 3X
Change oil every 4K
 
might be interesting to see what weather people generally ride in too

I ride in all-weathers, I'm wondering if they has anything to do with a most of my electrical issues
 
Nice thread. My bike is kind of a POS so this is the thread for me. :D

I've had to replace the right side engine case gasket, the fuel pump O-ring, the fork seals, and I'm about to replace the chain (it's rusty and has stuck links). Replaced a footpeg I think, put the stock mirrors back on, and with the aid of some zip ties put the stock turn signals back on.

My bike currently has 21k miles (I think?) and I've owned it for I guess about 5k miles. It's a 2007 that was beat to hell by the gang of folks that owned it before me. It's got touches of rust and bent parts galore.

Edit: Most recent repair was the fuel pump O-ring, a new tank might well be the next part replaced if I ever get the money.
 
greg said:
might be interesting to see what weather people generally ride in too

I ride in all-weathers, I'm wondering if they has anything to do with a most of my electrical issues
Click to expand...

Not to de-rail the thread, but I've found (when riding back and forth to work, before retirement, HEAVY rain/sun, etc), any and all electrical connections I pull apart (including bulbs), I put a dab of di-lectric grease on. Keeps the water out and the connectors happy... Strongly recommended...

Back to the thread. :thumbup:
 
My bike has been solid through the years.

2006 and the only thing to break was my clutch cable (near the lever, of course) at 27100 miles. It wasn't even completely snapped, but if I kept riding it would have been within a day or two. Idk that I wouldnt consider this maintenance since this is normal for clutch cable.

Other than that just routine maintenance and a valve adjustment..
 
Water Bear said:
Nice thread. My bike is kind of a POS so this is the thread for me. :D

I've had to replace the right side engine case gasket, the fuel pump O-ring, the fork seals, and I'm about to replace the chain (it's rusty and has stuck links). Replaced a footpeg I think, put the stock mirrors back on, and with the aid of some zip ties put the stock turn signals back on.

My bike currently has 21k miles (I think?) and I've owned it for I guess about 5k miles. It's a 2007 that was beat to hell by the gang of folks that owned it before me. It's got touches of rust and bent parts galore.

Edit: Most recent repair was the fuel pump O-ring, a new tank might well be the next part replaced if I ever get the money.
Click to expand...

I don't think he's looking at wear and tear items (chains, tires, etc) but for instance the fuel tank O-ring, rusty tank, etc..:thumbup:
 
TownsendsFJR1300 said:
Not to de-rail the thread, but I've found (when riding back and forth to work, before retirement, HEAVY rain/sun, etc), any and all electrical connections I pull apart (including bulbs), I put a dab of di-lectric grease on. Keeps the water out and the connectors happy... Strongly recommended...

Back to the thread. :thumbup:
Click to expand...

yeah I need to get me some dielectric grease

I had problems with the rear indicators rusting inside. They have a hole that allows water (and salt) to get in, and they just end up corroding and falling apart. I suspect my front ones might be in a similar state
 
ChevyFazer said:
04 fz6 bought with 10k sold with 45k

2 sets of handlebars
2 brake levers
1 clutch lever
1 mirror
Cracked rim (I cracked it changing a tire)
Cracked frame
Cracked oil pan
Stater
Fork seals
Rear rotor

Sent from my pocket rocket that don't know how to spell
Click to expand...

lol - ah, how many of those are the bikes fault? :spank:

Not that I'm picking on you, but you did put it out there! :thumbup:
 
2005 FZ6 39,738 miles owned since 2011 with 12,000 on it


TPS sensor replaced under recall.
recently my turn signals have been working intermittently , but that is because the resistors (aftermarket LED's all the way around) are going bad and just need replaced nbd.
 
2009 FZ6, purchased last spring with 2000 miles on it. Clock now @20,000.

No repairs!

Though I am starting to hear some cam chain noise... So this winter it will get a new CCT & Chain along with a valve shim check, and adjustment.
 
2006 Fz6 purchased with 9.5k miles

-14k miles blown engine (thrown rod)

The upside is that I now have a 2006 and half model (07 engine with under 5k miles)

no other issues, thankfully
 
You must log in or register to reply here.

Similar threads

Gary in NJ
Marc’s FZ6
Replies
3
Views
1K
EastcoastRN
E
K
Help me understand wind blast (>110 kph)
Replies
5
Views
1K
bryancraftyhands
bryancraftyhands
G
Fuel pump died and hasn't run right since!
Replies
1
Views
277
Gary in NJ
Gary in NJ
S
fz6 Yet another code 19 (solved)
Replies
4
Views
1K
squid0g
S
A
Clanking from exhaust on down rev - 08 fz6 s2
Replies
4
Views
1K
Agodnamedsin
A
Back
Top