Power Commander V

[FZ6Hot]

Anybody have a FZ6 2006 with a Power Comander V. Dynojet Research Inc. sent me the following reply

We only "officially" support the Power Commander V on 2009 and later model year bikes. If the newer model year bikes are essentially the same as their predecessor, as in your case, I see no reason the PCV would not retrofit back to earlier years

I can get a great deal on a Power Comander V, cheaper than a Power Commander III.

 

[Yamma~Tiger]

How much they want? for it? What are the advantages of upgrading from a 3 to a 5?

 

[Kazza]

Use the "search" button - I think a few guys here have had the PC V and have had a lot of problems.

 

[FZ6Hot]

Tried the Search before posting but returned 500 threads for Power Commander, not just V.

 

[Kazza]

Tried the Search before posting but returned 500 threads for Power Commander, not just V.

http://www.600riders.com/forum/fz6-mods/30399-my-power-commander-v-i-hate.html

Here's one for ya

 

[Motogiro]

Just off the top O my head, I would say it prolly retros back to the 07 because that was the first year of the O2 sensor but if the instructions require disconnection of the O2 sensor then it's prolly a go all the way back.
Kazza is correct, there was a thread on this. Good luck

 

[FZ6Hot]

http://www.600riders.com/forum/fz6-mods/30399-my-power-commander-v-i-hate.html

Here's one for ya

Thanks Kazza, I owe you a beer. Tracked down Krid80's post

http://www.600riders.com/forum/fz6-mods/30702-power-commander-pc-v-my-2006-a.html