vb7prog
Junior Member
I have a leak at the end of the hose indicated in the attached pictures. What happens is when I start the bike it drips for a minute or so, then I imagine the heat causes expansion and the leak seals itself when the bike is hot. The leak drips out brownish water, so I fear there may be some corrosion in the cooling system.
1. What is the part number for this hose? I tried to look it up but couldn't be certain if I had located the correct part number. Possibly also, what is the hose referred to casually as ?
2. What is the function of the hose, Pretty sure its from the coolant system, but want to verify it brings coolant from x to y or such.
My plan is to replace the hose myself and top off coolant system with water then probably take it to shop for coolant flush with 50/50 AF and water.
Any other comments / suggestions ?
Thanks
1. What is the part number for this hose? I tried to look it up but couldn't be certain if I had located the correct part number. Possibly also, what is the hose referred to casually as ?
2. What is the function of the hose, Pretty sure its from the coolant system, but want to verify it brings coolant from x to y or such.
My plan is to replace the hose myself and top off coolant system with water then probably take it to shop for coolant flush with 50/50 AF and water.
Any other comments / suggestions ?
Thanks