mynameisrodney
Junior Member
Hi mate,
I was wondering how much this would cost with shipping to Sydney Australia?
Cheers,
Chris
I was wondering how much this would cost with shipping to Sydney Australia?
Cheers,
Chris
Clutch Slave Levers - I'm making them again
- Thread starter killernoodle
- Start date
tupac
Junior Member
received and installed mine today!
wow! totalllllllly worth the 3 month wait!
its night and day! went from (thors hammer stuck to ground) to butter!
the clutch is almost as soft as the cbr250r i had and that's saying alot.
guys this mod is hands down maybe the best mod u can do. Its almost as good as getting your tax rebate check in the mail!
for any of u guys thinking about it-do it:Flash:
wow! totalllllllly worth the 3 month wait!
its night and day! went from (thors hammer stuck to ground) to butter!
the clutch is almost as soft as the cbr250r i had and that's saying alot.
guys this mod is hands down maybe the best mod u can do. Its almost as good as getting your tax rebate check in the mail!
for any of u guys thinking about it-do it:Flash:
CdnMedic
Junior Member
Mine are in the mail back to me 
falcon6123
Member
Out of curiosity, why did it take 3 months?
ronsonol
Junior Member
I've been waiting just as long, I was one of the $70. I can't spare sending in my core since my FZ6 is my daily.
Almost thinking of just buying the core and having it shipped to KN...
Almost thinking of just buying the core and having it shipped to KN...
Took me a little bit to find that (pg. 74), but I did. :thumbup: The link you were nice enough to supply no longer functioned, but I parsed the part numbers from it (linked below) if that helps anyone looking to go this route. I'd like to, but I probably shouldn't be spending any cash right now. I don't know, I may change my mind soon as I continue to anticipate spring.
5VX-15441-00-00 HOLDER, CLUTCH CABLE
5VX-16340-00-00 PUSH LEVER ASSY
jay5687
Junior Member
i just had some extra time this past saturday and i put my clutch slave lever on all i can say is wow:banghead::banghead::banghead::banghead: why didnt i put this on sooner literally nioght and day it is a new bike i was speechless when i put it in first gear and it was so smooth and gear shifting was unbelievable if you are considering this mod consider nomore DO IT and if you dont:spank::spank:
killernoodle
Making stuff
yblaser
Sinman
Your levers are shipping out tomorrow morning.
yblaser, I was very impressed with the packaging of the box you sent me!:BLAA:
Sinman
Your levers are shipping out tomorrow morning.
yblaser, I was very impressed with the packaging of the box you sent me!:BLAA:
killernoodle
Making stuff
None extra. I've been eating shipping since the first levers.
Glad you're happy with it!
So these guys are still waiting to get their levers (in order):
ronsonol
lghtmgr
xfer107
ThermalFZ6
And Falcon6123 is waiting on his cores to get to me.
If I missed something, please PM or email me! For some reason, my organization skills aren't quite on par with my fabrication skills.
Last edited:
mynameisrodney
Junior Member
Ok great! So just to check that the details haven't changed, address is
Reini Grauer
7417 Stone Mountain Ct
Charlotte, NC 28262
and it's $50 to [email protected] through paypal ? Sorry if something is incorrect, it's a long thread.
Reini Grauer
7417 Stone Mountain Ct
Charlotte, NC 28262
and it's $50 to [email protected] through paypal ? Sorry if something is incorrect, it's a long thread.
- Joined
- Feb 24, 2011
- Messages
- 2,917
- Reaction score
- 289
- Points
- 83
- Location
- Melbourne Australia
Hey Reini, are you still short off cores and brackets and still paying back for them?
My originals are just sitting in the cupboard and if my Mom hadnt got sick as we were leaving for the States in December I was going to bring them over and post them from NY. Just plain forgot in the rush!
Anyway I can prob mail them if they are still in demand and help out another member
My originals are just sitting in the cupboard and if my Mom hadnt got sick as we were leaving for the States in December I was going to bring them over and post them from NY. Just plain forgot in the rush!
Anyway I can prob mail them if they are still in demand and help out another member
yblaser
Junior Member
Wow, thanks killernoodle! I can't take credit for the box. I got a shipment at work in it and saved it for future use. It was a bit overkill, I know.
killernoodle
Making stuff
Yes! I'm definitely still buying them back.
killernoodle
Making stuff
That is all correct.
mynameisrodney
Junior Member
Awesome, thanks Reini, I'll get the parts posted to you asap.
agf, maybe to make it more economical you could get all the Aussie guys that had done this to send you the parts, then send them over in one go?
EDIT: Paypal transfer is done and parts ordered from partzilla. Cheers.
agf, maybe to make it more economical you could get all the Aussie guys that had done this to send you the parts, then send them over in one go?
EDIT: Paypal transfer is done and parts ordered from partzilla. Cheers.
Last edited:
CdnMedic
Junior Member
Got my parts back! Thanks man!
petaminox
Junior Member
Hi Killernoodle,
Any extra costs for shipment to Singapore?
I'm thinking of ordering the parts via Partzilla, mailing it to you, paying the $50 route.
Any extra costs for shipment to Singapore?
I'm thinking of ordering the parts via Partzilla, mailing it to you, paying the $50 route.
nixter
Junior Member
Well don't I feel dumb asking for a write up! Lol. That was easiest install ever! I didn't have my helmet so I could only do some laps around the parking garage but wow! No more jerky first gear engagement!
killernoodle
Making stuff
Nope, as long as it's not extraordinarily expensive to get it there.
CdnMedic
Junior Member
Put it on today! Feels great! Now if only the snow would melt... Hopefully be on the street next week.
