ChanceCoats123
Junior Member
Hello everyone in the StreetFighter forum!
This winter I'm hoping to get my naked conversion completed (2004 FZ6) so I can ride a brand new bike in the spring. :rockon:
I've messaged a few members already and have gotten some general information about part numbers that I will need, and I've searched around the forum for threads on the topic, which were helpful, but I just need a little more direction before I start ordering parts and potentially running into issues.
To start, my understanding is that I will need:
-Buell headlight assembly - (Y0421.1ADA)
-Headlight mounting bracket(s) - (M0645.1ADA)
-Windscreen - (M1600.1ACMW)
-Speedo mounting bracket (probably custom)
What I'm unsure of is the wiring for the headlights. I've read a bit about it, and read that it really isn't too bad, but I'm hesitant to just start hacking into the wiring harness.
*As a side note, I would like to retain my dual headlight mod when I switch to the Buell headlight. I figure the process is somewhat similar and that I just need to wire the low beam on the right headlight to the green lead that I already have in the wiring harness.
I'm also unsure on the headlight mounting. I contacted a member recently and he told me that he used "43mm STREETFIGHTER II SLOTTED HEADLIGHT BRACKET KIT" from flyncycle.com, but they don't seem to stock this item anymore. I figure any set of 43mm clamps can be made to work, but if anyone has advice on a clamp set which doesn't require much modding, I would greatly appreciate that.
I also have the part numbers listed above. I'm not sure if those are actually what I need (since every site I look on doesn't have pictures of them). I would love to be able to see the parts before I ordered them so I could at least have some idea of how they would fit together.
Thanks in advance for all the help guys!
This winter I'm hoping to get my naked conversion completed (2004 FZ6) so I can ride a brand new bike in the spring. :rockon:
I've messaged a few members already and have gotten some general information about part numbers that I will need, and I've searched around the forum for threads on the topic, which were helpful, but I just need a little more direction before I start ordering parts and potentially running into issues.
To start, my understanding is that I will need:
-Buell headlight assembly - (Y0421.1ADA)
-Headlight mounting bracket(s) - (M0645.1ADA)
-Windscreen - (M1600.1ACMW)
-Speedo mounting bracket (probably custom)
What I'm unsure of is the wiring for the headlights. I've read a bit about it, and read that it really isn't too bad, but I'm hesitant to just start hacking into the wiring harness.
*As a side note, I would like to retain my dual headlight mod when I switch to the Buell headlight. I figure the process is somewhat similar and that I just need to wire the low beam on the right headlight to the green lead that I already have in the wiring harness.
I'm also unsure on the headlight mounting. I contacted a member recently and he told me that he used "43mm STREETFIGHTER II SLOTTED HEADLIGHT BRACKET KIT" from flyncycle.com, but they don't seem to stock this item anymore. I figure any set of 43mm clamps can be made to work, but if anyone has advice on a clamp set which doesn't require much modding, I would greatly appreciate that.
I also have the part numbers listed above. I'm not sure if those are actually what I need (since every site I look on doesn't have pictures of them). I would love to be able to see the parts before I ordered them so I could at least have some idea of how they would fit together.
Thanks in advance for all the help guys!