brush, etc
Wow, awesome job. Googled chain brush. Why had I never heard of these before? I know the next thing I am buying now. Thanks for sharing. I'll have my new chain in pretty soon, now I have something to keep it beautiful with.
Any concerns about damaging O-rings tho by using water after you have taken all the lube off? I thought the chain lube was to keep water and grime out of the inner workings of the o-rings and the chain?
I’m using a 3 sided chain brush, identical with this:
Cycle Gear - FINISH LINE: The Grunge Brush,
The directions on the Chain Cleaner can are clear: spray cleaner over dirty chain (cold), rub with brush as needed, and rinse with cold water.
It will leave no residue or film, is clean like a dream.
A little bit of extra work with the brush at the sprocket, where thicker deposit of grime was present, but the Chain Cleaner is loosing up the grime at the 2nd application like a charm.
I used this cleaner before with same results. I don’t rub the chain very hard with the brush so I won’t deteriorate the o-rings, just gently, to loose that grime.
From what I know, the o-rings are keeping the grease needed to lube the chain intact and on the outside the chain needs only some minor lubrication so it won’t rust, etc (and that lubricant should be “o-ring safe”)
Practically you can’t damage the chain by cleaning it from the grime & dirt, as long as your o-rings are intact.
I’m switching to DuPont Teflon Lubricant and I needed to start with a clean chain.