Thanks to this thread I ordered a RoadId. They sent me an email this morning with a coupon to save $1. It's only a dollar, but if you're planning on buying one anyway save a dollar and you can buy an extra 1/2 litre of gas :)
It's good until May 12, 2013.
Road ID® USA's #1 Source for...
I had to loosen the muffler. The mid pipe has almost no wiggle room at all. Getting the muffler and mid pipe back together was the most difficult part of the project.
Thought I'd follow up on replacing my chain. I bought a continuous chain, so had to remove the swingarm to install it. I was able to get the swingarm off without removing the exhaust and easily removed the old chain. However; I figured since I was that far in, I may as well remove the...
I I finally received my chain and its a continuous chain. I don't have the patience to return it and order a new one.
To install this I'll need to remove the swing arm. The service manual talks about removing the Exhaust pipe and shock. I'm thinking that I probably don't need to remove the...
I assume its similar to my 86 750. With it, i put a jack under the oil pan, then removed the two upper bolts. The engine would then pivot on the long bolt at the bottom rear of the engine. Use the jack to lower the front to the ground, then remove the long bolt. Or, if you have a second...