WTB: 04' - 06' Ignition

[PDX_Piggy]

As said above, I need an ignition. From the connector back would be preferred, but cut wires are okay as long as there is enough to solder. Must include a key. If you have the seat release also that would be nice. Call, text or PM.

- Zach

(503) 490–9927

 

[FinalImpact]

As said above, I need an ignition. From the connector back would be preferred, but cut wires are okay as long as there is enough to solder. Must include a key. If you have the seat release also that would be nice. Call, text or PM.

- Zach

Even some good hi-resolution pictures of switch and harness right at the switch where the wires exit could be helpful, I don't know. . . Post them if you have them when your bike was torn apart. . . See thread if you wish to know why. . .http://www.600riders.com/forum/fz6-general-discussion/46948-ignition-question.html
Piggy - I'll delete this post if you wish. . . I just thought pic would be helpful until you find a new switch!

 

[PDX_Piggy]

Even some good hi-resolution pictures of switch and harness right at the switch where the wires exit could be helpful, I don't know. . . Post them if you have them when your bike was torn apart. . . See thread if you wish to know why. . .http://www.600riders.com/forum/fz6-general-discussion/46948-ignition-question.html
Piggy - I'll delete this post if you wish. . . I just thought pic would be helpful until you find a new switch!

It is appreciated. If you were to follow the ignition (where you stick the key in) down to where it enters the frame, that's where I cut it. Don't know if that explains it any better...

 

[PDX_Piggy]

Still need an ignition and key

 

[skooter65]

You still looking?

Also, will you need the gas cap and helmet lock?

 

[PDX_Piggy]

You still looking?

Also, will you need the gas cap and helmet lock?

I'll take it all if the price is right. Otherwise, just the ignition.