Two Bros TI's + Spikes installed.....LOTS of pics....

[lazamus69]

Well I got my exhaust on and it is suprisingly tame........YEAH RIGHT!!! They are freakin' SOOOOO loud. Maybe too loud?!?!?!...Time will tell(excessive noise tickets) Cops will hate these.... My girlfriend has some cop friends and one was over the other day. While she liked the spikes, she said that Im gonna get roasted FOR SURE because of the noise. . Great.... May get the DB killers. Im gonna wait abit before I rush to judgement on these.
As for the spikes, I thought I'd try and do something abit different. I like how they look. I've had mostly positive feedback about them, one guy told me they looked 'gay'. I told him to go get in his Tercel and F off....lol....To each his own I say. Anyways I like'em and thats what counts. I cranked the shock to '7' so iI havent had any bottoming out issues.
I used the FE kit that I purchased before I knew that I was gonna buy a TWO bros. system. I like how it sits under the seat more that the TWo Bros would. Its about 4 inches closer to the shock than if I didnt use it. I also liked the fact that I could use my stock license plate liight. The ones that come with the 2bros look dinky.
If anybody wants the signal lights that come with the 2bros exhaust you are welcome to them...just pay for shipping.

Heres some pics....

 

[Hellgate]

Well I guess the spikes will keep the small rodents off of your fender!

 

[jsw4178]

Looks Great!:rockon:

 

[mattcosta7]

the exhaust looks awesome, and, I know they sound amazing too!

The spikes aren't my thing, but they don't look bad. Definitely original!

 

[Avalon786]

Sweet pics! I like the spikes, they look sick! How'd you get them on there (glue?) :thumbup:

 

[lazamus69]

They have a screw that fastens them. Loctite blue was also used. Heres a pic of my rad cover too..

 

[DefyInertia]

Those spikes will hit the underside, no? I can't wait til Boneman sees this thread.

Looking good, man. I'm glad you like the pipes.

 

[lazamus69]

I've put on 1200km with the spikes installed and havent had any issues yet. Before I set the suspension on the '7' setting I did get some contact, but none since and I've hit some heavy bumps. If for some reason they start causing problems I'll just take'em off.

 

[exhaust]

Your going to put a hole right through that exhaust.Then it is going to get louder.

 

[Boneman]

Like the cans! Untill now I hadn't seen many good quality pics of the TI TB's before. Thanks for sharing!

As for the spikes...not my thing either. I'll just leave it at that!

Other than that, sweet looking bike! How do you like the volume on the TI cans! Loud eh!

 

[Boneman]

Those spikes will hit the underside, no? I can't wait til Boneman sees this thread.

Huh? How so?

I was going to suggest checking clearances under suspension compression, but you already rasied that concern.

It's nice to see more FZ6ers getting on the Two Brothers Train to Loud Town!!!! Whoooo, Whoooo

 

[DefyInertia]

Huh? How so?

I was just expecting a funny comment, that's all. I have not seen you post in a while, how is the parking lot LED show chillin' going these days? :Flash:

 

[Boneman]

Lol, No Parking lot LED shows to speak of. Apparantly ticket prices were too high and they all got cancelled.

Yeah, I've been a little pre-occupied with a few other things right now (read my latest post: http://www.600riders.com/forum/british-columbia/3274-1st-anual-vancouver-fz6-meet-5.html)

...BUT.....

I have recently started working back at the software company that I left a year ago, so I am back working at a PC all day now and should now have a bit more time for the ol forums. :cheer: I guess that could be good or bad.....lol.

 

[MarinaFazer]

nice lookin' bike. I was thinking of the two bros as well.

Where'd you get the wheel strips? I want the red strips, but am not sure where to buy besides online...do you think a moto shop will have em?

 

[reiobard]

nice looking cans, and the spikes look alright (not typically my thing either) but they look good as far as spikes go...

 

[lazamus69]

I purchased the wheel stripes at my local autoparts store. I got some off of ebay and I found I didnt like the width of them. I noticed all it was, was pinstriping, so I went and got a thinner variety and payed only $4. If you want them perfect you have to have a steady hand, but you can get them looking pretty even around the wheel.

 

[jsp]

Excellent pics. The Exhaust is great! :thumbup:

About the spikes: "Dont' bite my fender..."

 

[MarinaFazer]

ok, so they don't come already rounded out or what? are there any creases to deal with?

 

[lazamus69]

No creases whatsoever, just a steady hand and patience. You can stick it to the rim and if you dont like how they go on, you can pull it back off and reapply. I wouldnt waste time with ebay pre-curved ones. Try it out. Pinstriping is cheap.

 

[maverick1970]

No creases whatsoever, just a steady hand and patience. You can stick it to the rim and if you dont like how they go on, you can pull it back off and reapply. I wouldnt waste time with ebay pre-curved ones. Try it out. Pinstriping is cheap.

+1 :thumbup: