Turn signal stalk holes in front fairing

[LesL60]

What do y'all do when replacing turn signals with a simple threaded bolt when mounting to front fairing with those ovoid pockets for the OEM stalks?

I called and ordered what Cycle Gear recommended and they aren't a match for the shape. There must be something out there...

Anybody make spacers on their own, or know of a source for a workable solution?

Thank you!

 

[khammy]

ebay search for these Yamaha R1 R6 Indicator / Turn Signal Adapters FZ1 FZ6

What do y'all do when replacing turn signals with a simple threaded bolt when mounting to front fairing with those ovoid pockets for the OEM stalks?

I called and ordered what Cycle Gear recommended and they aren't a match for the shape. There must be something out there...

Anybody make spacers on their own, or know of a source for a workable solution?

Thank you!

 

[gnorth75]

I took the OEM stalks to a metal fabricator and had them weld a piece on and drill a hole in the middle. Wasn't nearly as expensive as I thought. They charged me $30 to do both of them.

 

[LesL60]

Found them. Thank you.

 

[Ruggybuggy]

Follow this thread and the mod doesn't cost you a dime. :thumbup:

http://www.600riders.com/forum/fz6-electrical/45198-mounting-custom-turn-signals-easy-solution.html

 

[rivettm]

What do y'all do when replacing turn signals with a simple threaded bolt when mounting to front fairing with those ovoid pockets for the OEM stalks?

I called and ordered what Cycle Gear recommended and they aren't a match for the shape. There must be something out there...

Anybody make spacers on their own, or know of a source for a workable solution?

Thank you!

I just bought large washers and sprayed them black. I think they turned out decent, not perfect but more than good enough.

Light Mods

 

[RCPMg33k]

Rizoma makes a spacer too. I am using them since I am also using Rizoma lights. ;-)