TheFemaleBiker
Junior Member
I need some help!
Recently my back right turn signal stopped working, I opened it up thinking it would be a blown bulb when in actual fact the whole bulb connection was corroded.
So I changed the turns signals at the back for some aftermarket standard bulb ones which I already had fitted to the front which solved the issue. But then there was another issue, my hazards no longer work, the turn signals all flash for a brief second if I turn hazards on and then nothing. My turn signals don't work for a brief time after turning the hazards off, but then they work after waiting for a few seconds.
Turn signal fuse is fine, the switch gear seems fine too, I have no clue what could be the issue. Any ideas?
Recently my back right turn signal stopped working, I opened it up thinking it would be a blown bulb when in actual fact the whole bulb connection was corroded.
So I changed the turns signals at the back for some aftermarket standard bulb ones which I already had fitted to the front which solved the issue. But then there was another issue, my hazards no longer work, the turn signals all flash for a brief second if I turn hazards on and then nothing. My turn signals don't work for a brief time after turning the hazards off, but then they work after waiting for a few seconds.
Turn signal fuse is fine, the switch gear seems fine too, I have no clue what could be the issue. Any ideas?