austindv
New Member
If you set the clock, will it hold the time OR RE-SET as if you disconnected the battery?
Somewhat sounds like either a bad ground or a bad hot line (connection) going into the unit.
I'd double check all the wires from the meter back, again, while it's running and see if handling the wiring changes anything..
Just to clarify, did the bike ALWAYS SPIN OVER, but just NOT start?? OR, NOT SPIN OVER AT ALL.. (BIG difference).
The bike has not been spinning over at all. That was what made me think the battery was bad. But I knew that when I put the new one in and it didn't fire right up that something else was going on.
I feel like i've checked the wires from the meter down a thousand times, I made sure that all connections were solid and not 'kinda on there' but really good connections.
I can't mess with the meter right now as I have the battery out, trying to swap this starter motor which has been quite a headache this morning. But as soon as I can get the new starter motor in and everything put back together I can start playing with it.