Some simple advice on bulb fitment

[NearOn]

Hi, this isnt anything to do with headlight MOD, I had my FZ6 a couple days now, and wanted to check what size bulb was in left hand headlight, which I think is a H7, anyway, I dont think I have put it back in correctly, here's a pic, please can someone tell me if is right or wrong and if so , how it should go in correctly, cheers guys!

 

[Motogiro]

Hello!
This link might help: :Flash::Flash::Flash: http://www.600riders.com/forum/fz6-mods/33513-twin-lights-mod-rewired.html :Flash::Flash::Flash:

The rubber boot looks a little kinked.

Also if you've touched the bulb's glass envelope, take it out and clean it of any oils or fingerprints you may have gotten on the envelope. contaminants turn into carbon which insulates the lamp from getting rid of heat causing premature failure. Alcohol is a good cleaner.

 

[NearOn]

Im just after which angle the bulb goes in, as I think the connectors should be like this,

_ _


not like this

_


_

which is way mine is currently

If someone could just have a look at the back of theirs, and compare to my picture that be easiest, cheers

 

[Motogiro]

:Flash:^^^^Did you look at the pictures from the link I posted in post#2 on this thread?^^^^


Cick here for pictures------> http://www.600riders.com/forum/fz6-mods/33513-twin-lights-mod-rewired.html :Flash:

 

[NearOn]

Cheers, looks like same way have mine fitted so maybe I did get it right in first place, thanks again!