cashcrzzy
Meandering Member
- Joined
- Jan 20, 2008
- Messages
- 145
- Reaction score
- 5
- Points
- 0
- Location
- Hockessin,Delaware
I keep seeing all these great threads about making your low beam work on both sides ,But the fact still remain`s that 1 high beam on the right side sucks,It only lights up the right side of the road With the high beam on . I searched high and low for a bulb that would be a dual element and fit into a H7 socket Without destroying the socket . There just arent any .. anywhere . they dont make them . So I have decided to make 1.First thing I did was use a micrometer and measure the socket size of the H7 bulb ,And found that the H4 bulb was going to be a perfect fit after a little cutting and grinding .Here are some pictures In my album to show you what I did .It also shows you how I wired it And how the head lamps look at night .In the night picture the fence is 125 feet(low beam) ,Past the cat tail`s is aprox 200 feet(high beam) . In one of the pictures it shows a plastic ring on the back side of the modified bulb that ring is so that the bulb is tight in the housing when the retainer is installed .
Have fun modding :iconbeer:
Greg A.
http://www.600riders.com/forum/album.php?albumid=9
Have fun modding :iconbeer:
Greg A.
http://www.600riders.com/forum/album.php?albumid=9