Problem with Light mod!

[grunt1]

I went to perform the light mod on my 08 this morning and ran into a snag. When I opened the wiring harness, near the switch, the green wire with orange dots is no where to be found! There is a dark green 14gauge and a light green 16 gauge wire. I have seen pics of the harness on previous posts showing dots on all of the wires. There isn't any dots on these. I'm wondering if it's something new? Any ideas??

 

[exhaust]

Its one of those two. I can't remeber when I did it to my 08 but it is one of those. Take a light tester and see which one has power to it with the bike running.

 

[PrayHarder]

You can also look at the wires going into the headlamps.

One will be a ground and one will be the hot wire. You can just match the coloring/striping on the wire there with the one in the wiring harness.

Ben

 

[grunt1]

Thanks! FZ6 in NH helped me out. FYI it's the bright green one! Just finished mod, works like a charm. Now, if my FE would hurry up and get here!!

 

[FZ1inNH]

Good job grunt1! Welcome to the forum and modding!