• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

PCIII Installed!!!!

Kriswithak

Senior Member
Joined
Aug 18, 2009
Messages
1,459
Reaction score
15
Points
0
Location
Sydney, Australia
Visit site
After getting an awesome deal on Wolfman's second hand PCIII (THANKS!!!!) I got it installed this morning, and managed to take the bike out for a ride!
Much nicer on and off the throttle even with a map not tailored for my bike currently installed, and it cleaned up the down low which was pretty mushy since I put on the exhaust!
Have to say after initially opening the seat and tank to take a look at installing it I was feeling a bit dubious if I would be up to it, but it was actually really simple!
The only issue I had was there is this retarded formed area on the plastic under the seat its meant to velcro too, right where I wanted to put it... Anyone find a way to get around this?

Definately going to get it dyno'd after the next service!

Thanks again to Wolfman for being such a champ!

(I'll try to add some pictures later once I get the camera charged)
 
After getting an awesome deal on Wolfman's second hand PCIII (THANKS!!!!) I got it installed this morning, and managed to take the bike out for a ride!
Much nicer on and off the throttle even with a map not tailored for my bike currently installed, and it cleaned up the down low which was pretty mushy since I put on the exhaust!
Have to say after initially opening the seat and tank to take a look at installing it I was feeling a bit dubious if I would be up to it, but it was actually really simple!
The only issue I had was there is this retarded formed area on the plastic under the seat its meant to velcro too, right where I wanted to put it... Anyone find a way to get around this?

Definately going to get it dyno'd after the next service!

Thanks again to Wolfman for being such a champ!

(I'll try to add some pictures later once I get the camera charged)

Glad you got the bugger installed...your riding around with a little bit of quite a famous little pink bike on board....now go out to Eastern Creek and qualify on the 3rd row of the grid in the FZ6 Cup...

:D
 
I don't think he did, but when I realised he was selling one of his bikes I figured there was a chance he might have one lying around and checked just incase, was very happy to get an answer!

I also have a you beaut ohlins rear shock lying around..that I might be parting with if the right offer presents itself.
 
Nice work Kris.
If you are interested in gettin the bike dynoed & a custom mapping see Trev at Doin Bikes. He knows his stuff & is the man who tunes Bryan Starings bike that won the SS round at PI on the weekend :thumbup:
 
Back
Top