Moto-777 shorty lever install

wolfrace999

Junior Member
Joined
Aug 6, 2009
Messages
21
Reaction score
0
Points
0
Location
Sheffield, UK
Visit site
order these off ebay took 6 days to come

from a seller called moto 777

as seen in this thread

fitting guide:
tools needed: 10mm socket and ratchet
Time: 10 - 15 minutes

remove this bolt and nut
Image015.jpg


Image016.jpg


remove lever and install new one.
replace nut and bolt
Image017.jpg


and you can still grip with four fingers if neeeded

Image018.jpg


clutch side

loosen clutch cable adjuster

Image019.jpg


remove nut

Image020.jpg


pull out pin and remove lever

remove this sleeve you'll need it for the new one

Image021.jpg


opposite to replace new one

Image022.jpg


Image023.jpg


same you can still use four fingers if needed in traffic etc

Image024.jpg


don't forget to grease parts as required

hope this helps someone
 

stryken

Vertically Challenged
Joined
Sep 3, 2008
Messages
723
Reaction score
31
Points
0
Location
Imperial, Missouri
Visit site
Mine are on the boat, I ordered them about a week ago. Great seller too, emailed me a picture of the package with address on it before he mailed it off. These should look great on my new bars, now to shop for new grips. I have been looking at the driven d3 grips but not sure yet, any suggestions?
 

MaxRyan

Junior Member
Joined
Jan 11, 2010
Messages
92
Reaction score
4
Points
0
Location
Coquitlam, BC
Visit site
I just got my set in the mail and will be installing today. Also going to be lubing up my clutch cable. I am very pleased with the initial quality of the levers though, they look quite well made. Also it looks like they must have changed the design recently, mine came with a piece of paper showing the old and the new(new one has holes drilled in it).
 

SANGER_A2

Super Member
Joined
Oct 12, 2008
Messages
1,528
Reaction score
27
Points
0
Location
Southampton
Visit site
I'm still loving mine. You REALLY need to buy a new camera dude! Mine is just a cheap crappy one, but I feel happier with it's picture quality now! :)
 

MaxRyan

Junior Member
Joined
Jan 11, 2010
Messages
92
Reaction score
4
Points
0
Location
Coquitlam, BC
Visit site
Here is what the black look like,

2wntzpx.jpg


I also found out why my clutch felt like crap, the bushing is missing. I also had to file about the thickness of the powder coat off both sides to get them to fit properly.
 

Geoff

The Tall Guy!
Moderator
Elite Member
Joined
Mar 24, 2009
Messages
1,179
Reaction score
17
Points
0
Location
Desoto, Missouri, USA
Visit site
I would rather play stupid and play it safe and not order the wrong ones. but im looking at the the links on this seller's list of levers and I dont see fz6 04, should i be looking for fazer instead?
 

Geoff

The Tall Guy!
Moderator
Elite Member
Joined
Mar 24, 2009
Messages
1,179
Reaction score
17
Points
0
Location
Desoto, Missouri, USA
Visit site
I tried to contact seller but eBay won't let me for some reason. I want o know when he will get some more in so I can order some. "sigh...."
 

stryken

Vertically Challenged
Joined
Sep 3, 2008
Messages
723
Reaction score
31
Points
0
Location
Imperial, Missouri
Visit site
:cheer: ... Arrived Yesterday!!!! (MOTO-777)

Black on black goodness!!!

Shipping was the fastest I have ever seen coming from Hong Kong. From order to PO Box in 10 days. Nicer than expected !
 
Top