Mods so far...

[MiLToS_666]

Details in my signature...:BLAA:









Next on my list is front and rear led signals, led tail light a Top Sellerie seat and a Givi top case!
I'll be adding some stuff from Pro-Bolt as well, to replace some fairing bolts with black ones, oil reservoir cap and other small details.

 

[Erci]

Very nice!

 

[motojoe122]

I like it! Keep the mods going.

 

[mxgolf]

:welcome: Looking good. Very nice mods. Thanks

 

[MiLToS_666]

Thank you for the comments!:thumbup:

I need some help!
Does anyone know the size of bolt no. 18 in the following Parts Microfiche?

2005 FZ6ST - FZ6 Yamaha Motorcycle COWLING 1 Diagram and Parts

This is the direct part link:

90110-06200-00 YAMAHA BOLT,HEX SKT HEAD $2.46

I want to replace the 4 side fairing bolts cause 2 of them show some rust/wear but I don't want to buy the whole pro-bolt kit.
Will those fit?

4 Titanium Fairing Bolts - M6 - Ducati, Yamaha, Honda - eBay (item 130497818664 end time Aug-12-11 13:41:40 PDT)

Thanks!

 

[MiLToS_666]

Ordered two pairs of these (great price!):

Turn Signal Light for Yamaha YZF R6 YZF-R1 02-08 Clear | eBay

And this:

Yamaha 2004-09 FZ6 FZ 600 LED Tail Light Turn Signal S | eBay

Let's hope I receive them soon because I want to have them installed as soon as possible to complete the clean look!

Can anyone reply to the question I asked above?

 

[MiLToS_666]

Bump?

 

[rino60]

Just take out the bolt and take it to a hardware store. They'll tell you the size, length and pitch of the bolt.

 

[MiLToS_666]

Thanks for the reply, done that already in two different stores, the first didn't even have this kind of bolts, the other said he might be able to order some but it will take more than 20 days to arrive...
I'll try another one today...

 

[ChevyFazer]

If im not mistaken thoses should just be a standard 10mm bolt

Sent from my R800x using Tapatalk

 

[rino60]

There is a chance that if they're a 10mm, that they may be a metric fine, which has. 1.0 thread pirtch, instead of the standard 1.25 pitch (from memory).

Any of your fixing suppliers should have it, or some auto shops, as 10mm Metric Fine is, among other things, a small chassis bolt standard in a 8.8 HT.

Try somewhere like Ramset, Macsim, or an engineering supplier.

 

[ChevyFazer]

If they ^^^^^ dont have em then fastenall will but do they have a hex head or are they button head allen machine screws

Sent from my R800x using Tapatalk

 

[rino60]

It says socket head - I'd assume an Allen key head

 

[MiLToS_666]

I provided a link from ebay before that shows how they look like:

4 Titanium Fairing Bolts - M6 - Ducati, Yamaha, Honda - eBay (item 130497818664 end time Sep-11-11 13:41:40 PDT)

I'm not 100% sure if they are the correct size although they seem identical to mine.

 

[ChevyFazer]

If those are the right size then basicly your looking for a 6mm button head machine screw. You should be able to pick those up at any of those places

Sent from my R800x using Tapatalk

 

[MiLToS_666]

I went ahead and purchased a black aluminum fairing bolt kit from Pro-Bolt:

Fairing Bolt Kit - Excluding Screen - Titanium, Stainless Steel, Aluminium Fasteners & Motorcycle Bolts | ProBolt

I also got a black aluminum clutch cable adjuster!

:rockon: