RoadGator
New Member
I am about to put on 2 27W LED headlights. These things are Super bright. I wonder if I need a relay or if i can just use the stock wires and tap into them. I am also wondering if I could put a dimmer switch on them? I never put a relay on the ones I used on my truck but went right to the battery and had a switch in the cab. That was it. It does not seem that I would but better ask and feel stupid rather than be sorry I didn't and mad.
I was also Thinking of doing 2 13w lights and one 36w bar...Thoughts? The current draw of the 2 round ones are 2.25A@12V
I will also be using LED blinkers on the front as I got rid of the ones in back and use an integrated one with the tail light and did a flasher relay there.
I was also Thinking of doing 2 13w lights and one 36w bar...Thoughts? The current draw of the 2 round ones are 2.25A@12V
I will also be using LED blinkers on the front as I got rid of the ones in back and use an integrated one with the tail light and did a flasher relay there.
Last edited: