HVMP bar ends (HEAVY!) review

needsnumbers said:
Is it too late to jump in on this group buy? If not, please, could somebody send me the information through PM? Thanks
Erci, I'm in Montgomery, you've got a PM.
Click to expand...

I don't think so because I still haven't sent the payment! I was sleeping all day, and now I'm at work so I'm going to take care of the payment when I get home.

Thanks for organizing this! My bar ends were a bit beat up and I was wanting to get some heavier ones to deaden the vibration as well as being stainless and not painted they can bump stuff without hurting the finish...or at least being less noticeable. They should be an awesome combo with the new FZ1 bars I've also ordered :D
 
Mostly when I use PayPal I am simply hitting Pay Now...

I dont see a comment line to put FZ6 Group Buy...

Am I suppose to use the Email Recipient with the message as FZ6 Group Buy?

:don'tknow:
 
Jarad said:
Mostly when I use PayPal I am simply hitting Pay Now...

I dont see a comment line to put FZ6 Group Buy...

Am I suppose to use the Email Recipient with the message as FZ6 Group Buy?

:don'tknow:
Click to expand...

When you do "send", at the bottom there is subject which is prefilled for you with "you've got money" and under that there is big message field. Put it in the message field :)
 
Canadians have nothing to worry - Sue got back to me and it will be the same price for CAD shipping (but $70US). She would love to get the product out there as much as possible :) I'll be sending my payment shortly! Just out running some errands....

Cheers
 
Hi all,

Been known to lurk here, although I admit most of my info comes from Erci lately so if you have a question, [email protected] is the best way to reach me.

Thanks for the patronage. We really appreciate it. We're a mom and pop business who does this mostly for fun, and to earn a little gas money for our scoots.

I limited this group buy to plus or minus 15 pair, because this is a new design, and we cautiously made only about 25 pair so supplies are dwindling. Don't worry though more are on the way, and we can certainly do another group buy in the future. I can't say when my machinist will finish them, as we are small potatoes on his to do list.

Thanks again and ride safe,
Sue
 
HVMP said:
Hi all,

Been known to lurk here, although I admit most of my info comes from Erci lately so if you have a question, [email protected] is the best way to reach me.

Thanks for the patronage. We really appreciate it. We're a mom and pop business who does this mostly for fun, and to earn a little gas money for our scoots.

I limited this group buy to plus or minus 15 pair, because this is a new design, and we cautiously made only about 25 pair so supplies are dwindling. Don't worry though more are on the way, and we can certainly do another group buy in the future. I can't say when my machinist will finish them, as we are small potatoes on his to do list.

Thanks again and ride safe,
Sue
Click to expand...

Very cool! :thumbup:
 
Just a useful reminder here. These are being shipped without instructions (we don't have any printed yet). Installation is the reverse procedure of removing the stock bar ends. I'm sure you guys can figure it out.

SPECS:

USE BLUE THREAD LOCKER (aka LOCTITE)

Tighten to 60 in-lbs.

All orders have been shipped.

Cheers
Sue
HVMP.com
 
I couldn't believe how fast they arrived and how heavy they are!

I actually like the look even though nothing else really matches the stainless steel look...

oh well...

BTW- I also just added #7 1/2 lead shot to my handlebars and OMG! What a difference. The vibration reduction was night and day. Like a completely new bike. There was only a noticeable buzz at slightly faster than average highway speeds afterwards. I wish I would have put the bar ends on first as the added weight from the lead shot already had taken ssssoooo much of the vibration out. I would highly recommend this to anyone and if you don't like, its as easy as opening throttle side and pouring out. With both it's smooth as butter...

:steve:
 
CDE said:
I'm just inquiring about Canadian shipping...I will post an answer when received!
Click to expand...

I had sent an email to Sue from HVMP (the rep Erci was originally dealing with) and she said that the quoted group buy price does include Canadian shipping... Nice! :D
 
You must log in or register to reply here.

Similar threads

Canadian_fz6_guy
Handlebar upgrade
Replies
17
Views
2K
Canadian_fz6_guy
Canadian_fz6_guy
theJackal
Will fairings from 09 xj6 fit on an 08 fz6 converted to street fighter?
Replies
2
Views
902
theJackal
theJackal
happyker
Peace from wind noise.
Replies
1
Views
172
Motogiro
Motogiro
P
Only one High Beam with what I think is projector with angel eye installed? HELP?
Replies
2
Views
130
Papacheeks
P
gnyce
calculating electrical load
Replies
3
Views
474
Motogiro
Motogiro
Back
Top