caelanseth
Junior Member
While adding a USB charging port I accidentally bumped my tank and knocked it off the bike. This pulled the wires/terminals out of the plug and broke the fuel line. Not too big of a deal. I installed a new fuel line and wire the pump back up.
When I turn the key I can hear the pump whirring and priming like normal. The fuel gauge is indicating gas, so I know everything is hooked up correctly and getting juice.
Yet when I hit the start, the bike just turns over and over and will not start. I pulled the fuel line back off and gas poured out, so I'm assuming the pump is working fine and it is getting fuel.
Is there something I may be overlooking? Can't figure it out as I seem to be getting both spark and fuel. Any help is appreciated.
Edit: Just pulled error codes: 12, 30, 46.
12 I believe is CPS; I have no idea why that is being thrown. All my fuses are good and I can hear the relay clicking in the back when I turn the key. Battery is fully charged and in good shape. I tried rocking the bike in 1st and even roll starting; no good.
When I turn the key I can hear the pump whirring and priming like normal. The fuel gauge is indicating gas, so I know everything is hooked up correctly and getting juice.
Yet when I hit the start, the bike just turns over and over and will not start. I pulled the fuel line back off and gas poured out, so I'm assuming the pump is working fine and it is getting fuel.
Is there something I may be overlooking? Can't figure it out as I seem to be getting both spark and fuel. Any help is appreciated.
Edit: Just pulled error codes: 12, 30, 46.
12 I believe is CPS; I have no idea why that is being thrown. All my fuses are good and I can hear the relay clicking in the back when I turn the key. Battery is fully charged and in good shape. I tried rocking the bike in 1st and even roll starting; no good.
Last edited:
