FZ6 Rearset Set Back Plates For Sale

[oso2k]

Hi, I would like a set in black please.

Also question. Is there any problems with the center stand in the way after install?

No problems with the center stand. Not affected at all. See the linked to install instructions at the beginning of this thread.

PM Sent.

 

[oso2k]

Current Tally:
11 PAID

1. khammy - black - PAID
2. Gelvatron - black - PAID
3. starflyer - black - PAID
4. Lefty - black - PAID
5. motojoe122 - black - PAID
6. mayassa - black - PAID
7. ckrockets - black - PAID
8. fikshunn - black - PAID
9. megatronixs - black - PAID
10. JasonB - silver - PAID
11. QwickFliCk - silver - PAID
12. joshiepoogoose - black - unpaid
13. ??? - black - unpaid
14. Nelly - silver - unpaid
15. mave2911 - silver - unpaid

 

[Xavias]

If you have an open spot, some stuff happened and I'd gladly buy a set of these in black.

PM me paypal info and I can get you the money asap.

 

[oso2k]

If you have an open spot, some stuff happened and I'd gladly buy a set of these in black.

PM me paypal info and I can get you the money asap.

PM sent. Look for it.

 

[oso2k]

Current Tally:
12 PAID

Just 3 left (1 black, 2 silver).

1. khammy - black - PAID
2. Gelvatron - black - PAID
3. starflyer - black - PAID
4. Lefty - black - PAID
5. motojoe122 - black - PAID
6. mayassa - black - PAID
7. ckrockets - black - PAID
8. fikshunn - black - PAID
9. megatronixs - black - PAID
10. Xavias - black - PAID
11. JasonB - silver - PAID
12. QwickFliCk - silver - PAID
13. joshiepoogoose - black - unpaid
14. Nelly - silver - unpaid
15. mave2911 - silver - unpaid

 

[Chantal]

Interested...black, please!

 

[oso2k]

Interested...black, please!

Pm sent. Look for it.

 

[Nelly]

Current Tally:
12 PAID

Just 3 left (1 black, 2 silver).

1. khammy - black - PAID
2. Gelvatron - black - PAID
3. starflyer - black - PAID
4. Lefty - black - PAID
5. motojoe122 - black - PAID
6. mayassa - black - PAID
7. ckrockets - black - PAID
8. fikshunn - black - PAID
9. megatronixs - black - PAID
10. Xavias - black - PAID
11. JasonB - silver - PAID
12. QwickFliCk - silver - PAID
13. joshiepoogoose - black - unpaid
14. Nelly - silver - unpaid
15. mave2911 - silver - unpaid

Paypal sent mate,
Thanks for your patience,

neil

 

[oso2k]

Current Tally:
13 PAID

Just 2 left (1 black, 1 silver).

1. khammy - black - PAID
2. Gelvatron - black - PAID
3. starflyer - black - PAID
4. Lefty - black - PAID
5. motojoe122 - black - PAID
6. mayassa - black - PAID
7. ckrockets - black - PAID
8. fikshunn - black - PAID
9. megatronixs - black - PAID
10. Xavias - black - PAID
11. JasonB - silver - PAID
12. QwickFliCk - silver - PAID
13. Nelly - silver - PAID
14. joshiepoogoose - black - unpaid
15. mave2911 - silver - unpaid

 

[Ruggybuggy]

Do you have any black ones left. I put on FZ1 bars and I think these work nice with them. What's the cost? Has anyone had any problems long term with bending the shift rod and can a decent adjustment still be made?

 

[oso2k]

Do you have any black ones left. I put on FZ1 bars and I think these work nice with them. What's the cost? Has anyone had any problems long term with bending the shift rod and can a decent adjustment still be made?

No more black left once I receive an expected payment shortly. I have FZ1 bars as well. The two make a good sporty setup. Not as sporty as the 07 R6S I sold and not as stretched out as the putting clip-ons underneath the triple as in my previous setup on the FZ6. You don't need to bend the shift rod if space the top mount point of the rear set with an extra washer or two. No long term ill effects otherwise. Cost is $90.69 USD shipped internationally. Just one silver set left.

 

[Chantal]

No more black left once I receive an expected payment shortly. I have FZ1 bars as well. The two make a good sporty setup. Not as sporty as the 07 R6S I sold and not as stretched out as the putting clip-ons underneath the triple as in my previous setup on the FZ6. You don't need to bend the shift rod if space the top mount point of the rear set with an extra washer or two. No long term ill effects otherwise. Cost is $90.69 USD shipped internationally. Just one silver set left.

**PAYMENT SENT!!**

Please confirm when you receive it...for some reason, my last few private messages to you aren't showing in my Sent Folder!

Thanks!!
Chantal

 

[oso2k]

Current Tally:
14 PAID

Just 1 left (1 silver).

1. khammy - black - PAID
2. Gelvatron - black - PAID
3. starflyer - black - PAID
4. Lefty - black - PAID
5. motojoe122 - black - PAID
6. mayassa - black - PAID
7. ckrockets - black - PAID
8. fikshunn - black - PAID
9. megatronixs - black - PAID
10. Xavias - black - PAID
11. chantal - black - PAID
12. JasonB - silver - PAID
13. QwickFliCk - silver - PAID
14. Nelly - silver - PAID
15. mave2911 - silver - unpaid

 

[oso2k]

**PAYMENT SENT!!**

Please confirm when you receive it...for some reason, my last few private messages to you aren't showing in my Sent Folder!

Thanks!!
Chantal

I got all of them. Payment noted.

 

[oso2k]

Do you have any black ones left. I put on FZ1 bars and I think these work nice with them. What's the cost? Has anyone had any problems long term with bending the shift rod and can a decent adjustment still be made?

If you're still interested in the last silver set, you can have them. You can have them re-anodized. Essentially you'll have to strip the clear coat of the silver set and a bit of surface aluminum (1/1000"). You could also paint over the anodizing but would need a bit of prep work. Google for techniques for both.

 

[Ruggybuggy]

I was looking for a black set. What would you sell the silver ones for? Should I just wait until you have some black ones?

 

[Ruggybuggy]

If you're still interested in the last silver set, you can have them. You can have them re-anodized. Essentially you'll have to strip the clear coat of the silver set and a bit of surface aluminum (1/1000"). You could also paint over the anodizing but would need a bit of prep work. Google for techniques for both.

For the extra work I have to do to make them black can you do a deal?

 

[oso2k]

For the extra work I have to do to make them black can you do a deal?

Sorry the order is already built and they're in final assembly. They had lost the measurements on the dowel and just provided them that. It's also the very last set to be sold.

 

[motojoe122]

Sorry the order is already built and they're in final assembly. They had lost the measurements on the dowel and just provided them that. It's also the very last set to be sold.

PM sent to you.

 

[motojoe122]

For the extra work I have to do to make them black can you do a deal?

PM sent to you also.