Fitting Givi rack with scorpion oval exhausts

[mcorvet]

Please could someone give me some advice on how to fit a givi rear rack with my scorpion oval exhaust i have thought it impossible to do due to the rounded clamps fit to the standard exhaust bit have seen a bike on hear with the same set up as I'm wanting to do please can anyone help a I'm at my wits end with it
Thanks

 

[Cloggy]

Well Sanger_A2 posted this thread some time ago. It doesn't look easy so good luck :thumbup:

 

[SANGER_A2]

Well Sanger_A2 posted this thread some time ago. It doesn't look easy so good luck :thumbup:

As long as you are brave they will go on! I had to cut off a bit and space out a bit. Also, it makes it easier when fitting if you put it on loose and then tighten either the top or the bottom first - unfortunately I can't remember which it is best to do first though!

Good luck. If you find any tips when doing it post here.

 

[FZ6_Dude]

wow that looks like a nice pain in the ass.... i went with the shad top rack and it works fine with any aftermarket exhaust and was a simple 20-30 min. install and easily removable... if you ever go to the track or wish to... and i believe that it is compatible with other top rack mount pads like givi...