- Joined
- Feb 24, 2011
- Messages
- 2,916
- Reaction score
- 288
- Points
- 83
- Location
- Melbourne Australia
hey folks anyone had much experience with the above and the crankshaft postion sensor
Mine failed and left me stranded a week back- got the bike to the service crew and they fitted a second hand cps and I hoped all would be good until the new one arrived from japan in a months time.
Took the bike out today, rode no more than about 3 kms and stopped for a petrol re-fill then the bike showed error 12. the fuel pump primes, the starter turns over the donk but she -NO GO!
I have been told as soon as the cps cools down it will run again but fail as soon as the cps gets hot again.
do you think I am just unlucky that the second hand unit has failed or might there be a second issue that causes the fail.
btw when I picj=ked up the bike after fitting the 2nd hand unit it ran fine
any ideas/ experience/ knowledge /anecdotes more than welcome- I have done a few web searches but still somewhat in the dark
Mine failed and left me stranded a week back- got the bike to the service crew and they fitted a second hand cps and I hoped all would be good until the new one arrived from japan in a months time.
Took the bike out today, rode no more than about 3 kms and stopped for a petrol re-fill then the bike showed error 12. the fuel pump primes, the starter turns over the donk but she -NO GO!
I have been told as soon as the cps cools down it will run again but fail as soon as the cps gets hot again.
do you think I am just unlucky that the second hand unit has failed or might there be a second issue that causes the fail.
btw when I picj=ked up the bike after fitting the 2nd hand unit it ran fine
any ideas/ experience/ knowledge /anecdotes more than welcome- I have done a few web searches but still somewhat in the dark