• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

Another Power Commander question...

Boneman

Instructor
Elite Member
Joined
Mar 4, 2007
Messages
1,936
Reaction score
52
Points
0
Location
Victoria, BC
www.bonemanfz6.com
Does installing a PCIII unit 'smooth/even out' the touchy throttle/

By this I mean our throttles at the very beginning seem to have a very "on or off" feel; snappy. Common complaint by new owners/riders of the FZ6.

So does installing a PCIII fix or improve this at all?
 
A little. I think the touchy on/off is mechanical not the ECU.
It does however give a healthy bump in mid-range (seat dyno). I would love to see back-to-back pulls with it on and off. I suspect there is a little more top-end and a good mid-range bump.
 
It does, with a proper tune. With the stock dynojet maps it is hit and miss.
 
I found that it helped a lot on my 06. The transitions from off/on were jarring at times in the twisties, no matter how much I tried to be smooth with the throttle. After installing the PCIII (with stock map), it is much smoother. I think it was worth every penny. Your mileage will go down though, but I don't remember by how much ,I've had it on for a couple of years.
 
When I installed mine I didn't notice just how much it smoothed out the throttle. It wasn't until I took it off that I really noticed the on/off. So yes, it did smooth mine out.
 
I have only had my PC111 for a month but the first thing I noticed was that the throttle was a lot smoother :thumbup:

I definitely agree with Oz, I also noticed less touchy feeling with the throttle especially in first gear. Gave me more confidence on uphill stop and go. :BLAA:
 
Back
Top