brady_cakes01
Junior Member
Im going to be putting dual air horns on my bike, and i was wondering if anyone knew what type of horn switch we have, or an easy way to install the relay. New to riding and my FZ6 so any help would be awesome!
Airhorns on '06
- Thread starter brady_cakes01
- Start date
SovietRobot
Scourge Of Humanity
Don't wire then directly in to the stock horn switch.
Use relays(1 for each horn), wired directly to the battery for power (fused), then ACTIVATED by the horn switch.
Also if you choose to use 2 stebel airhorns, just let it be known that they draw a lot of current so try not to use them all the time
Use relays(1 for each horn), wired directly to the battery for power (fused), then ACTIVATED by the horn switch.
Also if you choose to use 2 stebel airhorns, just let it be known that they draw a lot of current so try not to use them all the time
brady_cakes01
Junior Member
well the set i got came with two horns(high and low tone) with a Y splitter to go from the compressor to each horn, so i think i should be able to just use the one relay that came with the kit...
SovietRobot
Scourge Of Humanity
Oh, okay then yes.
I thought you meant two individual horn assemblies, that would be nuts.
I thought you meant two individual horn assemblies, that would be nuts.
SANGER_A2
Super Member
I imagine the instructions will all explain it all anyway, but just connect the power line going to the original horn to the switching connector on the relay and then connect the relay directly to the battery and to the new horns. Boneman just did a post about relays and how they work here.
brady_cakes01
Junior Member
awesome, thanks for the help guys!:rockon: