socket

Hi all was looking for little mods to do and see some people have a voltmeter. Are these worth having? also where would you wire it to? if straight across the battery then it would need a switch. I have my usb socket wired to the hot of the brake light switch if I recall, could it use the same...

Apparently "Powerlet" went under (was notified by a customer). I was directed to "Warm and safe" for a replacement socket: BMW Socket With Spring Cap - Warm & Safe Heated Gear, LLC The installation hole size is the same as the Powerlet. It appears to be about identical to the...

Hi all just wondered what everyones must have tools for general maintenance were. Specialist tools can be included as its all interesting to hear what people use on their bikes. Ive pretty much got most standard socket tools etc I know its all relative to the job In hand but there might be a few...

Need help. I'm swapping out the stock handlebars on my 2009. I've got all the controls and stuff off and I'm ready to loosen the 4 bolts on the center clamp. These 4 bolts clamping the bars down will NOT budge. I'm just using a standard socket set and as I start to turn the socket it just spins...

Not been on the site for a while but thought after my last mod I would throw up a few words as there seems to be lots of threads online regarding what I did but few definitive instructions and answers which I needed. So this weekend I fitted a 12v socket to the FZ6. this is a pretty simple...

Excellent condition. Strong engine and runs great. Extras: LED auxiliary lights Puig dark touring windscreen Oxford heated grips Engine guards Top case rack New tires. New battery New chain & sprockets Bar raisers 12V socket Synthetic oil, recently changed. Flashed and replaced front brake...

Well I finally found out what has been causing my weird crunching sound, my sprocket side rear wheel bearing. The thing was toast, I'm guessing from the previous owners fall. Since the sprocket separated from the hub, it was pretty easy to remove the bearing and replace it. I realized I...

All, I wanted to populate my fairing/cowling with the marker lights (right next to the head lamps) as the US models leave these empty. Rumor has it that FZ1's have the bulb cover/socket assembly/housing (not sure what its called but I can't find a part number using this...

I am heading over to france in two months for a weeks riding. I wanted a power socket for an air compressor so I thought I'd stick on a satnav mount also. I have powered the socket straight off the battery. Might change it so the ignition has to be on for power or I might leave it so I can...