• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

New bike cam!

bmccrary

Touring Mod
Joined
Nov 10, 2007
Messages
1,728
Reaction score
18
Points
0
Location
Lexington, NC
Visit site
Santa did a darn good job this year!

He brought me this cool Motosport Hero onboard cam to put on the FZ6. I went out this evening and did a test run with it and some editing on movie maker.

[ame="http://www.youtube.com/watch?v=QYhS3yHZqv4"]YouTube - Test Run[/ame]

Should be plenty more when riding season comes around. I started working on my Youtube Channel. It can be found here.

YouTube - jbmccrar's Channel

Still a work in progress...


Enjoy!

-bryan
 
Been thinking of getting a helmet cam for a while now, thanks for showing me another option.... Good stuff!
 
I got an Oregon ATC3K for Christmas for on the FZ6

[ame="http://www.youtube.com/watch?v=c1dMLyFDkig"]YouTube - ATC3K Christmas Day test on FZ6[/ame]

I love it.
 
Nice clear picture. I would have liked to hear it without the music so w couldhear how much wind noise there was.

What communication device do you have on there and is it bluetooth?

It is possibly this video cam

GO PRO Be a HERO On-Board video camera

Steve

Steve,

It is the GoPro Motorsport Wide camera. It shoots at 5 megapixles, with a wide angle lense, 170 degrees. The wind noise is nothing. It is mounted inside a water tight case. At one point during the video I got it up to 90mph with little noise. It has multiple setting, which include a hi and lo sound setting. They recommend the low setting for motorcycles and other vehicals that have high vibrations.

Motorsports HERO WIDE camera

Hope that helps.

I can make a short clip for you to let you hear it with out music.

Oh and the communication device is the J&M.

http://www.600riders.com/forum/touring/7200-communication-devices.html Scroll down just a bit and you will see where I did a write up on it. It is not blue tooth.

Hope that helps. I will work on a short clip for you later.

-bryan
 
So here is the picture of the way the cam was mounted:

IMG_9971.jpg

Here are some easy options that I think might be fun.

IMG_9972.jpg

IMG_9973.jpg


[ame="http://www.youtube.com/watch?v=9tnkiv5fVeI"]YouTube - Wind Test[/ame]

And there is the wind test you were asking for. I got up to highway speeds in that shot. I wanted to see how the noise was as well.

-bryan
 
Nice cam mount. So, if you grab hold of it, does it take much to "break suction"? Looks like a brilliant idea. Thanks.

Hardly any wind noise too, that's pretty neat... There is a rather large screen there though :)
Be cool if you could do another test with it on the side of the fairing though?

That said though, very impressed. I wanna get a camera... now I wanna get one even more :thumbup:

:)
 
Last edited:
Nice cam mount. So, if you grab hold of it, does it take much to \"break suction\"? Looks like a brilliant idea. Thanks.

Hardly any wind noise too, that's pretty neat... There is a rather large screen there though :)
Be cool if you could do another test with it on the side of the fairing though?

That said though, very impressed. I wanna get a camera... now I wanna get one even more :thumbup:

:)

It has a really good suction. Once it is locked down it isnt coming off! Once you unlock it, it pop right off with out any damage.

My windscreen is large, it is the touring screen. However, like I mentioned before the camera has that low audio setting and it is mounted inside a water tight case, so I dont know if the wind noise will ever get too bad. Once it gets a bit warmer again, I might take it out with a few other angles to try out.

I'll be sure to post them.

-bryan
 
Back
Top