Where to buy R1 pod light holders for mod?

[Thatguy331]

Looking for a place online to order the R1 pod light holders for the pod light mod in the headlight area.

From looking at all the mod pages I know the PN is 5PW-84312-00-00 but I can't find anyplace online that sells them.

 

[Thatguy331]

Nvm, I found one!

Motorcycle Parts, Motorcycle Accessories by BikeBandit.com

 

[Dubbington]

these include the wires to splice right, not just the socket?

 

[koolfz6]

these include the wires to splice right, not just the socket?

according to bikebandit.com they come with the plug at the end of the wire to the main harness. You will have to splice into the main harness.

bikebandit parts numbers: 7274069-001 X2 for the pod lights, about 8.00 USD each.

http://www.bikebandit.com/houseofmotorcycles/yamaha-motorcycle-yzf-r1-2008/o/m17118

shows a picture of what you need.

 

[rrandall]

I know this is a bit off the specific subject but if you are considering the wiring harness for the headlight mod and don't want to make the male connector; the connector on the R1 Socket from bikebandit.com has a male connector that appeared to be the same as the male connectors used for the headlight connector half under the gas tank. I soldered the connector to my wiring harness and it perfectly and worked great. Saved me a lot of time making a connector.