jdmdohcpower
Junior Member
Just finished up a VS-2 and fz1 bars.(yes its in my living room, it rained all weekend. I need a garage 
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Weekend Mods complete! Hello Streetfighter..
- Thread starter jdmdohcpower
- Start date
ebster1085
Junior Member
Looks good man. Did you get the headlight fairings prepainted like that from Vishnu or did you spray them?
zackeeboy
Junior Member
Looks good man! I am doing my VS01 conversion this weekend - any advice or tips/tricks?
red_rock_beetle
Junior Member
screw a garage, i wish i could do my work in the living room! :rockon:
looks good!
looks good!
ejether
Junior Member
Looks great!
Are those stock bars?
Are those stock bars?
lastlaugh
Junior Member
Looks good! What mounts did you use for the mirrors?
jdmdohcpower
Junior Member
Thanks guys. I sprayed them myself with colorrite. Pretty simple if you know how to paint - be sure to prime gray first or they come out purple. I learned the hard way and had to sand em down.
As far as advice, get the plug and play harness from vishnu. It made it so much faster. Also I had cats eye signals with mounting tabs and wire adapters. Again, very simple. These can be bought on ebay or where ever. Also, do it on a day that the hardware store will be open. You will need to get some longer bolts here and there. In the mist of doing this I swapped the bars for FZ1 bars but the mirrors from vishnu's kit dont work with the fz1 bars. The only place to mount them on fz1bars is right after the clamp that holds the bar on and I cant see around myself. I have to change it, dont like the bar end mirrors so Im going to get the fz8 clutch perch and tap the master and go with stock fz8 mirrors.
Heres a better pic:
As far as advice, get the plug and play harness from vishnu. It made it so much faster. Also I had cats eye signals with mounting tabs and wire adapters. Again, very simple. These can be bought on ebay or where ever. Also, do it on a day that the hardware store will be open. You will need to get some longer bolts here and there. In the mist of doing this I swapped the bars for FZ1 bars but the mirrors from vishnu's kit dont work with the fz1 bars. The only place to mount them on fz1bars is right after the clamp that holds the bar on and I cant see around myself. I have to change it, dont like the bar end mirrors so Im going to get the fz8 clutch perch and tap the master and go with stock fz8 mirrors.
Heres a better pic:
Last edited:
Chantal
Junior Member
Just finished up a VS-2 and fz1 bars.(yes its in my living room, it rained all weekend. I need a garage
Looks awesome!
- Joined
- May 8, 2008
- Messages
- 15,356
- Reaction score
- 1,605
- Points
- 113
- Location
- San Diego, Ca.
Great job!
mayassa
Junior Member
looks good!
You need to move your throttle out a little on the bar or the bar end isn't screwed in all the way.
You need to move your throttle out a little on the bar or the bar end isn't screwed in all the way.
CBRF3RIDER
Junior Member
That blue looks pretty spot on! Very nice! This kit is really growing on me
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
CBRF3RIDER
Junior Member
Double post sorry
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
jdmdohcpower
Junior Member
I know Im going to have to drill a new hole in the bars to move the controls out furthur. I can feel it in the ride, its heavy. Next weekend!
