Universal Flush Mount Fronts

[boo68]

Bikemaster Universal Flush Mount Marker Light Kit - Motorcycle Superstore

Would anyone be able to tell me if/how I can install these on my FZ? I've had them since last October.. and I want to put them on. Any ideas?

Thank you

 

[oldfast007]

You can't, send then to me for further evaluation:thumbup:
j/k, I have no idea...

 

[boo68]

You can't, send then to me for further evaluation:thumbup:
j/k, I have no idea...

I could probably ride them up to you..

 

[oldfast007]

Bring em up. I'll have them on in 2 hours or less

 

[reiobard]

Bring em up. I'll have them on in 2 hours or less

probably true, but on whose bike?

 

[boo68]

Bah! when I went to the site to see if there were instructions, it says the kit is not DOT approved..hrmmm I live in MA so maybe wouldn't even pass inspection. We may have to go to the shop again so maybe I will bring them with me and ask them. Maybe they will even install them muhahahaha.. we spent like $2500 in the last 2 months there.

 

[reiobard]

Bah! when I went to the site to see if there were instructions, it says the kit is not DOT approved..hrmmm I live in MA so maybe wouldn't even pass inspection. We may have to go to the shop again so maybe I will bring them with me and ask them. Maybe they will even install them muhahahaha.. we spent like $2500 in the last 2 months there.

I bet you could figure it out, are those the 2 wire or 3 wire lights?

 

[boo68]

I bet you could figure it out, are those the 2 wire or 3 wire lights?

They are 2 wire. I had to open the package. They are pretty big so maybe they would pass inspection.

 

[willoby61726]

i had the exact pair of my fz and i really didnt care for them. the running light part of the bulb burnt out on one side after less than a week of use and you have to drill holes in your fairing. i took them of and replaced them with these.
eBay Motors: YAMAHA YZF 600 R6 R1 FLUSH LED EURO CLEAR TURN SIGNALS (item 180258515939 end time Jun-29-08 09:41:54 PDT)

it comes with a bolt attatched to the lens to mount it but i couldnt get it where i liked so i used automotive double sided tape. the kind that are used on the vent visors and such.


i also bought the resistor so the blinkers would flash at normal speed. BTW i still have my old ones that i painted the solid part blue and the lens is smoke if anyone is interested in them let me know. Id sell them for $15 shipped.

 

[sportrider]

I looked at those kind before I bought the ones I'm running. I didn't want to drill into the fairing so I passed on them. since they are just two wire lights you will lose your marker light.

here's mine
http://www.600riders.com/forum/fz6-mods/2085-i-got-my-flush-mounts-installed.html

 

[sportrider]

if you get them you'll need this also.

http://www.600riders.com/forum/product-reviews/3188-sportrider_fz6-s-product-review-led-flasher.html

 

[boo68]

i had the exact pair of my fz and i really didnt care for them. the running light part of the bulb burnt out on one side after less than a week of use and you have to drill holes in your fairing. i took them of and replaced them with these.
eBay Motors: YAMAHA YZF 600 R6 R1 FLUSH LED EURO CLEAR TURN SIGNALS (item 180258515939 end time Jun-29-08 09:41:54 PDT)

it comes with a bolt attatched to the lens to mount it but i couldnt get it where i liked so i used automotive double sided tape. the kind that are used on the vent visors and such.


i also bought the resistor so the blinkers would flash at normal speed. BTW i still have my old ones that i painted the solid part blue and the lens is smoke if anyone is interested in them let me know. Id sell them for $15 shipped.

Are those DOT approved/legal?

 

[CrazyBiker]

i had the exact pair of my fz and i really didnt care for them. the running light part of the bulb burnt out on one side after less than a week of use and you have to drill holes in your fairing. i took them of and replaced them with these.
eBay Motors: YAMAHA YZF 600 R6 R1 FLUSH LED EURO CLEAR TURN SIGNALS (item 180258515939 end time Jun-29-08 09:41:54 PDT)

it comes with a bolt attatched to the lens to mount it but i couldnt get it where i liked so i used automotive double sided tape. the kind that are used on the vent visors and such.


i also bought the resistor so the blinkers would flash at normal speed. BTW i still have my old ones that i painted the solid part blue and the lens is smoke if anyone is interested in them let me know. Id sell them for $15 shipped.

Make sure that you waterproof the. I installed them on my rear side pods and one of them is filled partially with water though the LEDs still work fine.