ebster1085
Junior Member
So just yesterday I installed a brand new Two Brothers CF slip on that I purchased on eBay. There were no instructions sent in the box, but the installation was pretty straight forward.
That being said I did run into one minor snag. I couldn't for the life of me find a way to make the fender eliminator that was provide with the kit to work. I could clearly see how it was meant to attach to the bike, but it just didn't fit.
I do not have any pictures, but the best way that I can describe it would be that the two half moon cutouts on the center piece of the FE did not line up with the pipes to allow me to bolt it down. It was as if they were not cut in the right area on the FE. When lined up between the two pipes, the top part of the FE was then about half an inch above where it bolts to the frame.
Not being able to use this, I did not utilize the two muffler clamps as I had nowhere to bolt them too. This did not strike me as a real problem as the mufflers were very snug between the top and bottom parts of the frame.
Below is a pic of the finished product. I am very pleased with the sound and look of this exhaust and would recommend it to anyone.
That being said I did run into one minor snag. I couldn't for the life of me find a way to make the fender eliminator that was provide with the kit to work. I could clearly see how it was meant to attach to the bike, but it just didn't fit.
I do not have any pictures, but the best way that I can describe it would be that the two half moon cutouts on the center piece of the FE did not line up with the pipes to allow me to bolt it down. It was as if they were not cut in the right area on the FE. When lined up between the two pipes, the top part of the FE was then about half an inch above where it bolts to the frame.
Not being able to use this, I did not utilize the two muffler clamps as I had nowhere to bolt them too. This did not strike me as a real problem as the mufflers were very snug between the top and bottom parts of the frame.
Below is a pic of the finished product. I am very pleased with the sound and look of this exhaust and would recommend it to anyone.