BlackSeicento
New Member
Hi all,
I'm tracing a lack of continuity between the right hand turn switch and the connector to the main front end wiring loom on my 5VX S1.
The turn signals works when I run a cable from the right hand switch post to the front indicator (front, rear and telltale light all illuminate) so I know bulbs / relays are good and I've tested the front wiring loom, good continuity between all pins.
So far I've removed the fuel tank and battery but still can't find the connector that connects the left-hand switchgear to the multi plug on the left hand side of the frame (circled in the picture). Both sets of cables go into the frame but I can't see where to gain access to them.
Any help gratefully received, I have a Haynes manual.
I'm tracing a lack of continuity between the right hand turn switch and the connector to the main front end wiring loom on my 5VX S1.
The turn signals works when I run a cable from the right hand switch post to the front indicator (front, rear and telltale light all illuminate) so I know bulbs / relays are good and I've tested the front wiring loom, good continuity between all pins.
So far I've removed the fuel tank and battery but still can't find the connector that connects the left-hand switchgear to the multi plug on the left hand side of the frame (circled in the picture). Both sets of cables go into the frame but I can't see where to gain access to them.
Any help gratefully received, I have a Haynes manual.
