TBS - no value on Cyl # 4

[gnyce]

Lubing clutch cable, adjusting headlights, and doing a throttle body sync, and not getting a value on Cyl 4, even with wildly adjusting the screw in either direction. I'm guessing this does not bode well, but - I dont' know what it is indicative _of_. I did swap hoses/dials between Cyl 3 and 4, to make sure my carb/FI sync tool was working ok, and the null-value followed along, so - it's not the tool. Leak somewhere?

 

[Gary in NJ]

Crack in the hose on the bike side?

 

[Motogiro]

Could the hose be blocked?

 

[gnyce]

I would guess more of a crack/leak then full blockage, but _only_ based on that fact that the needle was twitching _some_ and not completely still. So it wasn't "nothing" but certainly not anything that registered anything meaningful. Tight working spaces and cold garage but will see what else might be indicative.

Sidenote - Also going down the rabbit hole of aiming headlights - I find this post somewhat applies to me as well. But, well, this is what winter is for. Clutch pull much improved at least!

 

[TownsendsFJR1300]

Plus one on a cracked/split "bike side" hose...

.