Sprocket brand & sizes w/ fuel mileage

[Z3R0_zhift]

Hi guys

Currently I'm using Supersprox sprocket front and rear for my ride. I forgot the no of teeth for my front sprocs but it is the standard size as OEM and my rear sprocs I up from 45t—46t. I got the mileage about 340km if I cruise around 80-90kmh. How about yours?

 

[Cortez]

Stock front is 16T.
I've had 17T for about 6000 miles and saw no change in mileage, it's down to the wrist.
Also, under 500 revs of difference cruising makes virtually no difference.

I went back to 16T next chain swap. Bike was too sluggish in 1st and 2nd, even if I usually ride rather calmly.

 

[Z3R0_zhift]

True, was checking the gearcommander website and unsure whether is its accurate on the reads based on its rpm and speed.

Sent from my GT-N7105 using Tapatalk

 

[Cortez]

Yeah, it is.
I went for +1 up front for better MPG figures and didn't notice any change.
I did, however, notice a huge drop in acceleration that I wasn't expecting (I've done this before on other bikes)
since the 1st gear is so tall and it became even worse then.

 

[Z3R0_zhift]

Perhaps you could try up your rear by 1 or 2 . That could solve the pickup in acceleration. If you could reuse your 16t front and up the back. Shouldn't be an issue wouldn't it? Any thoughts?

Sent from my GT-N7105 using Tapatalk

 

[Cortez]

Perhaps you could try up your rear by 1 or 2 . That could solve the pickup in acceleration. If you could reuse your 16t front and up the back. Shouldn't be an issue wouldn't it? Any thoughts?

Sent from my GT-N7105 using Tapatalk

I went back to 16T as stated in previous post.