That1robbie
Junior Member
Hey guys!
I recently bought a used 2005 FZ6 that needed some work to be done. Mainly cosmetic, and some electrical. After I purchased it I realized the Display did not work (I have no idea how I missed that). The backlights seem to be working, but everything else isnt. I checked the wiring and everything seems okay, except for two connectors that are unplugged. I can't figure out if/where they are supposed to go.
Here are some pictures: Wires - Imgur
Picture 1 & 2 : First disconnection: Blue, Black, Brown
Picture 4: Disconnected White with pink stripe
Picture 5: This one was harder to get a picture of. It has an olive green, blue with red stripe, and Black (I'll double check this in a bit)
Any ideas?
EDIT: FIXED IT
So i took it apart again and traced all the wires. Everything looked good. After reading a few other threads here, I discovered a very obvious solution that I hadn't tried yet. Turns out, the fuse was blown. Thankfully, the spare was still in the fuse box, I plugged it in, and BAM. Everything is working now. Yayy. I am extremely happy now. Thanks for the suggestions guys.
I recently bought a used 2005 FZ6 that needed some work to be done. Mainly cosmetic, and some electrical. After I purchased it I realized the Display did not work (I have no idea how I missed that). The backlights seem to be working, but everything else isnt. I checked the wiring and everything seems okay, except for two connectors that are unplugged. I can't figure out if/where they are supposed to go.
Here are some pictures: Wires - Imgur
Picture 1 & 2 : First disconnection: Blue, Black, Brown
Picture 4: Disconnected White with pink stripe
Picture 5: This one was harder to get a picture of. It has an olive green, blue with red stripe, and Black (I'll double check this in a bit)
Any ideas?
EDIT: FIXED IT
So i took it apart again and traced all the wires. Everything looked good. After reading a few other threads here, I discovered a very obvious solution that I hadn't tried yet. Turns out, the fuse was blown. Thankfully, the spare was still in the fuse box, I plugged it in, and BAM. Everything is working now. Yayy. I am extremely happy now. Thanks for the suggestions guys.
Last edited: