• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

Scorpions Vs 2bros

It seemed with the stock pipe it took a long time to start to wind up and start pulling.

With the Scorps and stock cat (No aftermarket ECU, etc) it seemed to run considerably better/smoother with much less "acceleration jump" in the middle RPM's.

Idles fine (I have it set at 1000 RPM), I'm very happy with it the way it is. I'll turn off the helmet stereo just to hear the bike :)....


For me, a PCIII is just something else to set up/maintain, possibly fail (which they do on occasion).. That's my opinion.... :)

Scott
 
It seemed with the stock pipe it took a long time to start to wind up and start pulling.

With the Scorps and stock cat (No aftermarket ECU, etc) it seemed to run considerably better/smoother with much less "acceleration jump" in the middle RPM's.

Idles fine (I have it set at 1000 RPM), I'm very happy with it the way it is. I'll turn off the helmet stereo just to hear the bike :)....


For me, a PCIII is just something else to set up/maintain, possibly fail (which they do on occasion).. That's my opinion.... :)

Scott

Thanks. That does help a bit.
 
I want to get the Scorpion. Any suggestion on where to buy? Anybody got them recently? I would like to get teh new style. Thanks in advance.
 
I want to get the Scorpion. Any suggestion on where to buy? Anybody got them recently? I would like to get teh new style. Thanks in advance.

I've recently discovered that for one reason or another, the Scorpion cans are no longer being made for the FZ6. Unless I'm wrong, your best bet would be to look around for places that still have stock.

Also, the Scorpion website is being upgraded, so that could mean the introduction of a new exhaust line in the near future..
 
Back
Top