• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

Removing full fairing harness

JesseeS

Junior Member
Joined
Jul 14, 2014
Messages
37
Reaction score
0
Points
0
Location
Rhode Island
Visit site
Hey all, I tried search but couldn't find what I was looking for. I am in the naked process and was wondering if it is ok to run the bike without the front harness ( the one that runs the lights, turn signals and speedo, or if is in fact needed. Thanks for any help
 
Motogiro, if he reads this, will probably chime in. You don't even want to keep stock dash gauge/readout? That's what I call naked.
 
If it runs it's good. Instrument cluster is only required to give you information on the bike. I would not run the bike down the highway for a long time though because if there is an engine warning you wont see it. Temporary is fine.... :)
 
Awesome. Thank you guys for the response. This is my first "higher tech" bike and didn't know if there was some kind of anti theft protection or anything. No Speedo is just temp as I'm currently going naked, live in a condo and need to be able to move it frequently
 
Back
Top