hansfz6
Junior Member
Hey guys just got my new Puig racing screen for my 06. How hard are they to replace, and do I have to use the clear edging around the screen? Any other tips to make this easier. Thanx
Puig screen. Please help
- Thread starter hansfz6
- Start date
Hey guys just got my new Puig racing screen for my 06. How hard are they to replace, and do I have to use the clear edging around the screen? Any other tips to make this easier. Thanx
darkrider
Junior Member
Skill level on this is about a 1. Just get the old one off, put new one on, done. Yes, use the edging!
Hope this helps.
Hope this helps.
CCHOUSEKY
Kentucky Wildcat Fanatic
Very easy. There are 5 bolts...2 under each mirror boot and one up under the fairing at the "point" of the windscreen between the headlights.
A word of caution. DO NOT OVERTIGHTEN THE BOLT ON THE UNDERSIDE BETWEEN THE HEADLIGHTS! You'll notice that there's just a little plastic tab that the screw goes through...if you're not careful, you can snap this off.
I didn't use the edging, but others have. It's not a big deal. And be forewarned...the Puig won't fit as well as the OEM screen, but it'll work just fine. Other than that...you're all set.
A word of caution. DO NOT OVERTIGHTEN THE BOLT ON THE UNDERSIDE BETWEEN THE HEADLIGHTS! You'll notice that there's just a little plastic tab that the screw goes through...if you're not careful, you can snap this off.
I didn't use the edging, but others have. It's not a big deal. And be forewarned...the Puig won't fit as well as the OEM screen, but it'll work just fine. Other than that...you're all set.
