Caesar
Junior Member
I was looking for the vent line to my gas tank and came across this line that I am not sure what it is or where it leads. It looks like it's coming from my tank but it is blocked. Does anyone know what this is?
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
please help ID this cable
- Thread starter Caesar
- Start date
- Joined
- Apr 2, 2008
- Messages
- 3,041
- Reaction score
- 82
- Points
- 0
- Location
- Adelaide, Australia (GMT +9.5)
I wouldn't worry about it. I think there are 3 hoses from the tank that hang down, 2 of them are over-flow hoses, and that would be the third. Not sure what it's for, could be something the factory uses for pressure testing???
:rockon:
:rockon:
oaks
~~~~~
Edit: Removed bogus info. :spank: Have the same one, plugged just as you have, in addition to the two vent hoses hanging down to just above the center stand.
Last edited:
RJ2112
Junior Member
- Joined
- Mar 25, 2009
- Messages
- 2,108
- Reaction score
- 23
- Points
- 0
- Location
- Dahlgren, VA/USA
That's one of the vacuum ports so you can synch the throttle bodies.
Caesar
Junior Member
Ok so where can I find the vent hose for the gas tank without lifting the tank
They should be coming out under the frame behind where the center stand bolts are. You'll see three hoses with angle cut ends. Two are gas tank vent hoses and the last is for the coolant overflow tank.
Well unless the last guy to lower the tank pinched the lines and didn't pull them down out of the way properly. . .
Per OP those are the sync lines for the carbs to be balanced and they should be capped..
