fire561
Junior Member
I have a blown 09 motor with a hole under the starter and a crack on the oppisite side. I need a full motor low miles or cases to get my baby back on the road. Anyone know of any floating around?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Still looking for a motor? Will a 07 fz6 fit?
Your block (crankcase, pistons, rods, etc) and his head, a fair amount of parts (gaskets/rings, etc) and labor would make one good engine and a running bike..
BTW, how did your engine block break in that spot ???
Let me guess - Frame Slider FTW!
J/K honestly AURMEND. Sorry the bike is getting parted out...
Look closer at the second pic (that's what I thought).
A black frame slider is visable farther back on the rear most arm(directly above the scruffed up cover). That forward arm doesn't have sliders used there (unless he put a third slider there). The broke block is adjacent to the left, outtermost header.
That's why I asked, very odd...
That's why I won't put sliders on, saved some scratches, junked a frame..alright upon further inspection i found a hairline crack on my frame above the frame slider
Major impact on the forks, no damage on the headers, no visible scratches on the frame, frame slider got grinded down, scratches on the cover. Could the major impact on the forks/wheel have caused all that? because i dont think the frame sliders would have cause the damage to the block. Could it be the sudden stop upon impact? I was going between 40-60mph and it did hit the guard rail and curb.
. i just looked and nope, no mark.