New Mod ;-]

[nimzotech]

I cut (free-hand, I may add) a good portion of the rear tire mud flap, or whatever else you may call it. Makes the Fizzer look sportier; the tire bigger.

 

[oldfast007]

Looks Good!! Now imagine that rear end with a wave rotor.

 

[Motogiro]

And a brandy new tire! Looks good!

 

[Jman]

Your exhaust looks sweeeet!:thumbup:

 

[abacall]

Looks good. I had done the same thing last Fall, but a loose license plate tore it off!!
Always check the plate holder bolts with those aftermarket cans.

 

[Wolfman]

Looks Good!! Now imagine that rear end with a wave rotor.

The rear end looks hot with a wave rotor!
View attachment 26768


Nice job on the hugger, looks great.....much better job than i did!

:thumbup:

 

[K Rig]

AHHH! That M4 exhaust is lookin sexy!

 

[sublime0713]

Curious...what did you use to cut it? Dremel? Did you get a lot of melting at the cut? I was thinking of doing something like this and your input would be most appreciated. :thumbup:

 

[Bram]

looks very cool,

I wonder, if it rains, will there more water going upwards to the underseat exhaust? And if so, will it "smoke" a little bit when coming to a stop?

 

[nimzotech]

Curious...what did you use to cut it? Dremel? Did you get a lot of melting at the cut? I was thinking of doing something like this and your input would be most appreciated. :thumbup:

I used scissors! The plastic is pretty soft almost any sharp edge tool would work.

looks very cool,

I wonder, if it rains, will there more water going upwards to the underseat exhaust? And if so, will it "smoke" a little bit when coming to a stop?

Hardly ever rains in the desert of Southern California ;-). If water did get on it and the pipes were hot, I can imagine smelling something and seeing a bit of smoke ; but then again I don't get many opportunities to ride in the rain.

 

[Bram]

I used scissors! The plastic is pretty soft almost any sharp edge tool would work.

Did you take the fender off the bike when you cut it?
I tried to take mine off a minute ago, but the left side was stuck by the underseat storage-plastic cover.

very neat job if it is done with scissors:thumbup:

 

[nimzotech]

This a pretty easy mod to do, not to mention it's free. Yes do take it off first! You will have to pop up the center plastic plug. If you're careful, using a thin flat edge should help it pop right out. If it breaks no big deal! You still have what 4 screws holding it securely in place. My broke off. I used heavy duty scissors - don't tell the wife :cheer:

 

[The Toecutter]

I took mine off and put the bolts and the clip back in the swingarm..i like the trimmed down look you got there.

 

[Kamloops]

Why does the brake caliper and disc look so dusty red?

Nice tire , I just put on a set of the same and broke them in last night!

 

[nimzotech]

Why does the brake caliper and disc look so dusty red?

Nice tire , I just put on a set of the same and broke them in last night!

Dunno . Maybe somoene else can answer that. Does anybody else have a red-tinted caliper and disc?