Wildcard
Junior Member
Anyone out in MD/DC/VA area that can synch up throttle bodies? I'll buy you lunch/dinner/pay you or a combination of each. :thumbup: PM if anyone can help before I go out and buy the tool.
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Need TB synch
- Thread starter Wildcard
- Start date
D-Mac
Distance Rider
Damn. I wish I lived closer! It's an easy procedure with the tool.
if you do a search and buy the tool, there are a few very good "How-To's" in here that make it seem very simple to do. I am planning on trying it out come springtime.
Wildcard
Junior Member
Yea I've seen the vids and know its simple. I just don't really want to spend money on the tool just yet haha. I just installed the MIVV cat delete pipe and that finally threw them off. BTW I didn't hear much if any difference between having the Two Bros exhaust with the cat vs. without. Only difference now is that it pops and burbles a bit more which sounds sweet lol.
Any local buddies have the tool that you can borrow? they are fairly universal and work with carbs and FI bikes from what i understand.
Wildcard
Junior Member
Yea I don't know anyone locally with one. That's why I'm trying to meet someone locally through here haha
What year is your bike? How many miles? The only reason I ask is that, perhaps, you might try disconnecting your battery for a few minutes and seeing if the ecu re-adjusts when you start it next. Just a thought...
Wildcard
Junior Member
its an 08 with almost 4k miles. And yea, I disconnected battery for over 30 minutes and didn't change. Thanks though. Idle is pulsating. Definately out of synch
tum226
Junior Member
Not sure if it is the same with bikes but with cars it takes some time of running for the computer to adjust. You might want to consider just riding it around for a bit and see if that helps. And going thru ignition cycles also is key where it gets to full operating temp and closed loop and what not with the O2 sensor.
Wildcard
Junior Member
I rode for 45 minutes last night through all gears and rev ranges. And stopped along the way. Thanks though.
Pretty positive on the issue. Just trying to get a easy solution other than buying the tool. If noone has one locally I'll get it and do it myself. Just don't want to spend that money just yet.
Pretty positive on the issue. Just trying to get a easy solution other than buying the tool. If noone has one locally I'll get it and do it myself. Just don't want to spend that money just yet.
I wish i wax closer, i would like to learn too, we could split the tool as well and learn to mess up (I mean fix) out bikes together
SovietRobot
Scourge Of Humanity
Did the same thing to me when I installed a cat elim pipe. I know it didn't throw off the sync because I put the cat back on and it runs as good as before.
But perhaps a sync set up specifically for no cat would be beneficial. I would like to know.
Wildcard
Junior Member
Yea I know that if I put the cat back on the issue will most likely disappear.
And I just googled (that a verb yet?) and found this Q: Aftermarket Cans and low idle issues. - Sportbikes.net which only confirms my suspicious.
And I just googled (that a verb yet?) and found this Q: Aftermarket Cans and low idle issues. - Sportbikes.net which only confirms my suspicious.
